Cornwall · England
Bath Re-enamelling in Mylor Bridge
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Mylor Bridge. Send photos for a free, fixed quote.
- Resurfacing from £350
- An old resurfacing that is failing
- Wear marks under the taps
How we handle bath re-enamelling in Mylor Bridge
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Our repair technicians work on pressed steel baths, acrylic baths and basins & shower trays, and common reasons people contact us are brown or grey marks that don’t clean off and chips and rust in more than one place.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.
- Where
- Mylor Bridge (TR11)
- Region
- Cornwall
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
When we would advise against a repair
In fairness, there are a few things a repair won’t fix:
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Mylor Bridge
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Nearby places to Mylor Bridge
Other services in Mylor Bridge
For landlords and businesses
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
How the visit works
Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take the best part of a day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Advice
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Whether we combine several jobs
- Any earlier repairs that need removing first
- The size and number of damaged areas
- How hard the colour is to match
Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- A close-up of the damage, in focus
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Mylor Bridge and the surrounding area
Mylor Bridge is about 2 miles north of Falmouth, in Cornwall. We visit homes and businesses in Mylor Bridge, so nothing has to leave your home. Mylor Bridge is one of 644 towns and villages in Cornwall where we work.
Every address in TR11 is within our area. From Church Road, Meadowbank and New Row or a nearby road, we can come to you. Nearby, we also work in Restronguet Passage (1 mile north-east), Trelew (1 mile south-east), Bissom (1 mile south-west), Tregew (1 mile south) and Mylor Churchtown (1 mile south-east). We also work in nearby towns such as Truro (5 miles north), Camborne (10 miles west), Redruth (7 miles north-west), Helston (10 miles south-west), Hayle (15 miles west) and Rosewarne (10 miles west).
Landmarks near Mylor Bridge
We visit homes around Penryn College, All Saints and Mylor Community Primary School. The closest station to Mylor Bridge is Penryn station, roughly 1.9 miles south-west of the centre. Other landmarks nearby include St Mawes Castle (3.2 miles south-east) and Penryn Museum (1.7 miles south-west).
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Clean with a soft cloth and mild detergent
- Keep suction mats out of the bath
- Don’t let dyes or oils sit on the finish
- Fix dripping taps quickly
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Should you replace it?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why us?
- A fixed quote before booking
- One price list for the entire UK
- Most jobs done in one visit
- Nothing taken out or refitted
See our prices page or bath cost comparison.
Questions from Mylor Bridge
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Can you repair several things at once?
Of course, and it usually saves money. Send pictures of everything together and we will quote them together.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
How do I get a price for bath re-enamelling in Mylor Bridge?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
About our accreditations · Every repair comes with a one-year guarantee.
