Surrey · England
Bath Re-enamelling in Nalderswood
Bath re-enamelling for Nalderswood, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- An outdated colour you’d like to change
- Brown or grey marks that don’t clean off
Bath re-enamelling at your home in Nalderswood
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We’re often asked to fix several chips and rust patches and a coloured bath you want in white, across basins & shower trays, Victorian roll-tops and cast iron baths.
Every job is backed for twelve months in Nalderswood and everywhere else. If something goes wrong with the work, we come back.
- Location
- Nalderswood (RH2)
- Region
- Surrey
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Once the work has cured, treat it gently:
- Repair dripping taps early
- Wash away dyes and oils after use
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Your questions about bath re-enamelling in Nalderswood
What happens after I send pictures?
We come back with a fixed quote. There is no obligation to book.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can you repair something that’s been repaired before?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
How long does re-enamelling take?
Generally one day, with the bath ready the day after. A badly pitted bath can need a second day.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
- Same prices wherever you are
- Straight answers about what a repair can do
Take a look at our pricing or guide to resurfacing and replacement costs.
About Nalderswood
Nalderswood is about 3 miles west of Horley, in Surrey. Jobs in Nalderswood are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Our technicians cover 395 places across Surrey. Our jobs stretch from Nalderswood to London (22 miles away).
Here we cover the RH2 postcode area. From Smalls Hill Road and Deanoak Lane or anywhere nearby, we can come to you. We also cover the places around Nalderswood: Norwood Hill (1 mile south-east), Shellwood Cross (1 mile west), Parkgate (2 miles south-west), Cudworth (2 miles south-west) and Charlwood (3 miles south). We also work in nearby towns such as Guildford (15 miles west), Epsom (10 miles north), Horley (3 miles east), Redhill (4 miles north-east), Ewell (11 miles north) and Reigate (3 miles north-east).
What’s near Nalderswood
Around Nalderswood, we work in homes near Church of St Bartholomew, Burys Court School and Edolph's Copse. The closest station to Nalderswood is Salfords station, about 3.4 miles east. A little further out are Reigate Priory Museum (3.3 miles north-east) and East Surrey Hospital (3.7 miles north-east). For a walk, there’s Reigate Heath and Colley Hill.
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
How it works
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes the best part of a day in most cases. We leave the room clean and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Make sure the room can be ventilated
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
Ask for a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Read more
Places near Nalderswood
Other services in Nalderswood
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- How many items we do on one visit
- Any earlier repairs that need removing first
- The size and number of damaged areas
- What kind of damage it is
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- A picture taken from further back
- What it’s made of, if you know
- The postcode, so we can plan the visit
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.
When we would advise against a repair
A repair isn’t right for every job, for example:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
