Newport · Wales
Bath re-enamelling & resurfacing in Nash, Newport
Fixed-price bath re-enamelling in Nash and the surrounding area, normally in one visit.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Several chips and rust patches
Bath re-enamelling in Nash without replacing anything
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Common call-outs are for thin, worn enamel in places and a peeling or bubbling previous coating, on pressed steel baths, Victorian roll-tops and cast iron baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Nash (NP18)
- County
- Newport
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Nash
Nash is about 3 miles south-east of Newport, in Newport. From the centre of Nash to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Nash is one of 69 places in Newport where we work. Our nearest city page is Birmingham, about 78 miles away.
Postcode districts we cover here: NP18. You will find streets such as West Nash Road and St Mary's Road, and we cover them all. Neighbouring places we cover include Saltmarsh (1 mile south-east), Pye Corner (1 mile north), Broadstreet Common (1 mile north-east), Goldcliff (1 mile east) and Glan Llyn (2 miles north-east). We also work in nearby towns such as Newport (3 miles north-west), Victoria (3 miles north-west), Stow Hill (3 miles north-west), Maindee (3 miles north-west), Gold Tops (4 miles north-west) and Summer Hill (3 miles north).
Around Nash
Around Nash, we work in homes near St Mary's Church, Lliswery High School and Newport Wetlands and the streets around them. Nash’s nearest station is Newport (South Wales) station, roughly 3.6 miles north-west. Well-known places in the area include Newport Retail Park (1.9 miles north) and Tredegar House Museum (3.7 miles west). Not far away are Somerton and Alway.
Your questions about bath re-enamelling in Nash
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
Do you work in Nash?
Yes. We cover the whole UK and travel to Nash and the rest of Newport. Send us photos for a fixed quote, or call 0345 017 0787.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you cover the entire of Newport?
We work UK-wide, and that includes Nash. Prices do not change with location.
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take the best part of a day, and you can get on with other things while we’re there.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
How to get a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Related advice
Do you need bath re-enamelling in Nash?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
It’s worth getting a quote if you see:
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- Chips and rust in more than one place
Before you book anyone
- Whether they match the colour on site
- What preparation is included
- Aftercare advice
- Whether there are any call-out or travel charges
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Repairing versus replacing in Nash
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why choose Surface Doctor in Nash
- CHAS and Constructionline accredited
- A fixed quote before you book
- We will tell you if it’s not worth repairing
- Same prices wherever you are
Read our pricing or guide to resurfacing and replacement costs.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including Nash. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- The material and finish
We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
When you take your photos, a few simple things make all the difference:
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- The material, if you know it
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
For landlords and businesses
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
What we can’t put right
Before you book, it’s worth knowing the limits:
- A bath that is rusted through
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly before booking.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Other services in Nash
About our accreditations · Every repair comes with a one-year guarantee.
