Kent · England
Bath re-enamelling & resurfacing in Nash Street, Kent
Our technicians come to Nash Street for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Lots of chips and rust spots
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We clean up when we are done and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
Getting a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Advice
How we handle bath re-enamelling in Nash Street
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on cast iron baths, pressed steel baths and basins & shower trays, and the jobs we see most are thin, worn enamel in places and an outdated colour you’d like to change.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Nash Street (DA13)
- Area hub
- Kent
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Nash Street
What else we do in Nash Street
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Nash Street: your questions answered
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What happens next?
You get a fixed quote and available dates. If we need another angle, we will ask.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
When to call us in Nash Street
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is usually perfectly sound.
Send us a picture if you notice any of these:
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
What your quote should include
- Whether the colour is mixed to match
- A fixed price, and whether VAT is included
- Whether there are any call-out or travel charges
- Aftercare advice
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Nash Street. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Repair technicians who travel to you, UK-wide
- A fixed quote before you book
- We’ll tell you if it’s not worth repairing
- No need to remove anything
Take a look at our full price list and resurfacing vs replacement cost guide.
About Nash Street
Nash Street is about 3 miles south of Gravesend, in Kent. Our technicians come to customers in Nash Street, so you do not need to take anything anywhere. Nash Street is one of 922 places in Kent where we work. You can also see our page for London, about 21 miles away.
Here we cover the DA13 postcode area. Nearby, we also work in Round Street (1 mile east), Longfield Hill (1 mile south-west), Meopham (1 mile south), Sole Street (1 mile south-east) and New Barn (1 mile west). Within a short drive, we also cover Maidstone (12 miles south-east), Dartford (7 miles north-west), Sevenoaks (11 miles south-west), Gravesend (3 miles north), Tonbridge (14 miles south) and Northfleet (3 miles north).
What’s near Nash Street
In Nash Street, that means homes near Istead Rise Primary School, Jeskyns and Meopham School. Nash Street’s nearest station is Meopham station, roughly 0.7 miles south. Other landmarks nearby include Stone Castle (4.7 miles north-west) and Gravesham Community Hospital (3.2 miles north). Not far away are Sawyers Lake and Gad's Hill.
When we would advise against a repair
We will always be straight with you, so here’s what a repair cannot fix:
- A cast iron or steel bath that’s cracked right through
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
Send us pictures and we’ll tell you honestly.
Materials we work on in Nash Street
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Prices and what affects them
Prices start from £350. You won’t pay by the hour. The price is based on:
- What kind of damage it is
- How easy the damage is to reach
- The material
- How many areas need work
A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.
Quotes from your pictures
You can normally get a fixed price without us visiting. To make it quick:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- Any details about the material
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
About our accreditations · Every repair comes with a one-year guarantee.
