Hampshire · England
Bath Re-enamelling for Nashes Green homes
Full bath re-enamelling and resurfacing in Nashes Green, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- Brown or grey marks that do not clean off
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Nashes Green
- No extra charge for your area
- Nothing taken out or refitted
- Accredited with CHAS, Constructionline and SafeContractor
- Typically one visit, start to finish
See our pricing and resurfacing vs replacement cost guide.
About our bath re-enamelling in Nashes Green
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the next day. We are often asked to fix a coloured bath you want in white and a coating lifting around the plughole, across Victorian roll-tops, pressed steel baths and basins & shower trays.
Every job is backed for twelve months in Nashes Green and everywhere else. We return to put right any problem with the work.
- Area
- Nashes Green (RG25)
- Area hub
- Hampshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Have chips seen to early
- Use washing-up liquid and a soft cloth
- Respect the curing time we give you
- Keep suction mats out of the bath
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Nashes Green and nearby
Nashes Green is about 5 miles north-west of Alton, in Hampshire. Wherever you are in the RG25 postcode area, we carry out the work at your property. Nashes Green is one of 683 places in Hampshire we cover. Our nearest city page is London, about 46 miles away.
Here we cover the RG25 postcode area. Neighbouring places we cover include Ellisfield (2 miles west), Upton Grey (2 miles north-east), Upper Common (3 miles west), Cliddesden (3 miles north-west) and Viables (4 miles north-west). Within a short drive, we also cover Basingstoke (5 miles north-west), Farnborough (13 miles north-east), Fleet (10 miles north-east), Aldershot (12 miles east), Alton (5 miles south-east) and Petersfield (14 miles south).
What’s near Nashes Green
In Nashes Green, that means homes near Church of St. Mary and the streets around them. The closest station to Nashes Green is Alton station, about 4.7 miles south-east of the centre. Further afield, we also cover the area around Gliding Heritage Centre (1.4 miles south-east) and Basing House (4.6 miles north). For a walk, there’s Holybourne Hill.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
When to call us in Nashes Green
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
It’s worth getting a quote if you see:
- A coating lifting around the plughole
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- Chips and rust in more than one place
Comparing quotes
- How your room will be protected
- If travel is included in the price
- Aftercare advice
- Who will actually do the work
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair can’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- A bath that’s rusted through
- Leaks from fittings rather than the bath
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Prices and what affects them
Prices start from £350. We give every job a fixed price from photos. These are the things that affect it:
- Unusual colours or finishes
- The type of damage
- The material
- Where the damage is and how we get to it
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before you book.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- The material, if you know it
- Something in shot to show the size
- Your postcode, so we can check dates
- A photo taken from further back
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Nearby places to Nashes Green
Also in Nashes Green
Nashes Green questions
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Do you come to Nashes Green?
Yes. We cover the entire UK and come to Nashes Green and the rest of Hampshire. Send pictures and we’ll quote, or call 0345 017 0787.
What happens after I send pictures?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Can I get a quote without a visit?
Typically, yes. Clear pictures let us give you a fixed quote without visiting.
Do you charge for travel?
We don’t add a call-out fee. Your fixed price includes everything.
What areas do you cover?
All of Hampshire, and the rest of the UK. Travel is included in the price.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
The process
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a full day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Move bottles, mats and clutter away from the area
- Make sure the area is dry
- Keep pets and children out of the room while we work
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
