Hampshire · England
Bath Re-enamelling in Upper Common
Damaged bath in Upper Common? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- Chips and rust in more than one place
Bath re-enamelling in Upper Common, done in place
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Our repair technicians work on cast iron baths, acrylic baths and Victorian roll-tops, and people most frequently call us about thin, worn enamel in places and an original cast iron bath that needs restoring.
Big or small, you get the same one-year guarantee in Upper Common and across Hampshire.
- Location
- Upper Common (RG25)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
About Upper Common
Upper Common is about 4 miles south of Basingstoke, in Hampshire. Across the RG25 area, we carry out the work at your property. We cover all 683 towns and villages in Hampshire. You can also see our page for London, about 48 miles away.
All of RG25 is covered, from the main roads to the quietest streets. Neighbouring places we cover include Ellisfield (1 mile north-east), Cliddesden (2 miles north), Nashes Green (3 miles east), Viables (3 miles north) and Eastrop (4 miles north). We also work in nearby towns such as Basingstoke (4 miles north), Winchester (14 miles south-west), Fleet (12 miles north-east), Aldershot (15 miles east), Alton (6 miles south-east) and Petersfield (15 miles south-east).
Landmarks near Upper Common
Our clients here include homes close to Church of St. Martin and The Fox pub. Upper Common’s nearest station is Basingstoke station, roughly 4.4 miles north of the centre. Well-known places in the area include Barton Castle (4.6 miles south) and Gliding Heritage Centre (3.5 miles south-east). For a walk, there’s Farleigh Hill.
Repairing versus replacing in Upper Common
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, with the bath back in use the day after. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there’s no premium for Upper Common. The job itself decides the price: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Upper Common
- Colour-matched on site
- Nothing taken out or refitted
- A year’s guarantee on all work
- Most jobs done in one visit
Take a look at our prices page and bath cost comparison.
Aftercare tips
Looking after the surface is easy:
- Leave the bath for the full curing time before using it
- Repair dripping taps early
- Do not let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What we are called out for in Upper Common
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Common reasons people in Upper Common contact us include:
- Brown or grey marks that do not clean off
- An old resurfacing that’s failing
- A bath that stays dull however much you clean it
- Wear marks under the taps
Comparing quotes
- How long the guarantee is and what it covers
- How changes to the job are handled
- What aftercare is recommended
- How the colour is matched
Landlord and trade work in Upper Common
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
What affects the price in Upper Common
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- Any earlier repairs that need removing first
- How many areas need work
- The colour and finish to match
- What the surface is made of
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Getting a price from photos
You can take the photos on your phone. Just make sure we can see:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- One picture of the entire bath
To get a price, send two or three pictures through our quote form or ring us. We will say immediately if a repair is the right fix.
What a repair can’t fix
Some jobs are not right for a repair, for example:
- Holes rusted through the metal
- A bath split right through the body
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Upper Common
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We tidy up before we leave and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the day after.
Preparing for the visit
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you are under no obligation.
Advice
Upper Common questions
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Do you charge for travel?
There’s no separate call-out charge. Your fixed price includes everything.
How much does bath re-enamelling cost in Upper Common?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up and a photo of the entire item and your postcode.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Will there be fumes?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Places near Upper Common
Also in Upper Common
About our accreditations · Every repair comes with a one-year guarantee.
