South Lanarkshire · Scotland
Bath re-enamelling & resurfacing in Nerston, South Lanarkshire
Full bath re-enamelling and resurfacing for homes and businesses in Nerston and across South Lanarkshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- A bath in a colour that no longer suits
About our bath re-enamelling in Nerston
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Typical jobs include a period or roll-top bath worth keeping and a dull, rough surface that won’t come clean, across basins & shower trays, cast iron baths and acrylic baths.
Whatever the size of the job, it’s backed by a one-year guarantee in Nerston and across South Lanarkshire.
- Area
- Nerston (G74)
- Area hub
- South Lanarkshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- How much damage there is
- The type of damage
- Previous DIY repairs that have to come out
- The colour and finish to match
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Quotes from your photos
Photographing the damage takes a minute. Please include:
- One picture of the whole bath
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- Details of any past repairs
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Do you need bath re-enamelling in Nerston?
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Signs it’s time to call us include:
- Staining under the taps and around the waste
- Wear marks under the taps
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
What to look for in a quote
- What prep work is covered
- How changes to the job are handled
- How the room is protected while they work
- What the guarantee covers, and for how long
Nerston and nearby
Nerston is about 2 miles north-east of East Kilbride, in South Lanarkshire. Our repair technicians come to clients in Nerston and the surrounding area, so nothing has to leave your home. Nerston is one of 139 towns and villages in South Lanarkshire we cover. Our jobs stretch from Nerston to Glasgow (6 miles away).
Postcode districts we cover here: G74. Whether you live on East Nerston Court, East Nerston Grove and Glasgow Road or anywhere nearby, we can come to you. If you’re just outside Nerston, we cover Stewartfield (1 mile south-west), East Mains (1 mile south), The Village (2 miles south), St Leonards (2 miles south) and West Mains (2 miles south-west). Larger places within reach include Hamilton (4 miles east), Uddingston (4 miles north-east), Blantyre (3 miles east), Larkhall (8 miles south-east), Carluke (13 miles east) and Rutherglen (3 miles north-west).
Local landmarks in Nerston
In Nerston, that means homes near East Kilbride, St Andrew's and St Bride's High School and Cambuslang Park, among other places. The closest station to Nerston is East Kilbride station, roughly 1.5 miles south-west. Nearby you’ll also find Hairmyres Hospital (2.9 miles south-west) and Kingsgate Retail Park (within half a mile south-west). Not far away are Cathkin Braes.
Towns and villages near Nerston
Other services in Nerston
What happens on the day
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. Most jobs take the best part of a day, and you can get on with other things while we’re there.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Plan for the room to be out of bounds to pets and children
How to get a price
The quickest way to a price is to send two or three photos through our quote form or call us. We will tell you honestly whether it can be repaired.
Advice
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Aftercare tips
Once the work has cured, treat it gently:
- A quick wipe after use keeps limescale away
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
- Rinse off hair dye, oils and bath bombs immediately
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
Work for landlords and builders
If you manage property in Nerston, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Nerston: your questions answered
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Do you cover the whole of South Lanarkshire?
Everywhere in the UK, Nerston included. Travel is included in the price.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Colours mixed by hand to suit your surface
- Accredited with CHAS, Constructionline and SafeContractor
- Rooms protected and left tidy
- One price list for the whole UK
Read our pricing and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
