Somerset · England
Bath re-enamelling & resurfacing in Netherstoke, Somerset
Local bath re-enamelling for Netherstoke: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Staining under the taps and around the waste
About Netherstoke
Netherstoke is about 5 miles south of Yeovil, in Somerset. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover 640 places in Somerset, from the larger towns to small villages.
Jobs in BA22 work the same way as everywhere else we cover. If you are just outside Netherstoke, we cover Halstock (1 mile south), Sutton Bingham (1 mile north), Pendomer (2 miles north-west), Melbury Osmond (2 miles east) and West Chelborough (2 miles south). We also work in nearby towns such as Yeovil (5 miles north), Chard (13 miles west), Crewkerne (6 miles west), Somerton (13 miles north), Ilminster (12 miles west) and Preston Plucknett (5 miles north).
What’s near Netherstoke
Locally, our jobs take us to homes close to Church of St Juthware and St Mary and the streets around them. The closest station to Netherstoke is Chetnole station, about 3.5 miles east of the centre. Other landmarks nearby include Yeovil Hospital (4.7 miles north) and Dawe's Twineworks (3.5 miles north-west). Green spaces nearby include Abbot's Hill.
About our bath re-enamelling in Netherstoke
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. We work on basins & shower trays, pressed steel baths and Victorian roll-tops, and people most frequently call us about staining under the taps and around the waste and chips and rust in more than one place.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Where
- Netherstoke (BA22)
- Area hub
- Somerset
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Netherstoke
What else we do in Netherstoke
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which generally takes a full day. If anything looks different from your pictures, we will talk to you before going ahead.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep children and pets away from the room on the day
- Open a window if you can
- Let us know which floor the room is on
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Holes rusted through the metal
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Netherstoke. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- How much damage there is
- Access to the area
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before you book.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- One picture of the whole bath
- Any details about the material
- One sharp close-up of the damage
- Any earlier repairs or coatings
For a price in Netherstoke, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Netherstoke: your questions answered
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Netherstoke.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Do you come to Netherstoke?
Yes. We cover the entire UK and travel to Netherstoke. Send photos and we’ll quote, or call 0345 017 0787.
How much does bath re-enamelling cost in Netherstoke?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your BA22 postcode.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Repair or replace in Netherstoke?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the whole surface without moving it. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Netherstoke clients choose us
- A fixed quote before you book
- Colour mixed on the day to match
- A year’s guarantee on all work
- Work done at your home or business
Read our pricing and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Don’t leave a chip unrepaired
- Leave the bath for the full curing time before using it
- Never use suction bath mats
- Dry the bath after use to stop limescale
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Do you need bath re-enamelling in Netherstoke?
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
The most common problems we’re called about are:
- Several chips and rust patches
- A dull, rough surface that will not come clean
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
Comparing quotes
- Whether a trained technician does the job
- What happens if the damage is worse than the pictures show
- What prep work is covered
- How long the guarantee is and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
