Somerset · England
Bath Re-enamelling for Halstock homes
Problem with your bath in Halstock? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- An outdated colour you’d like to change
Bath re-enamelling at your home in Halstock
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We regularly repair cast iron baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are wear marks under the taps and lots of chips and rust spots.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Where
- Halstock (BA22)
- Region
- Somerset
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Wash away dyes and oils after use
- Do not leave a chip unrepaired
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
When a repair is not the answer
A repair isn’t right for every job, for example:
- Anything hidden under an old coating, until we remove it
- A bath that is rusted through
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we’ll say what we think.
Materials we work on in Halstock
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Your questions about bath re-enamelling in Halstock
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Which areas do you work in?
We cover the entire UK, including Halstock and the rest of Somerset. Send your postcode with your photos and we will offer you dates.
Do you charge for travel?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
What happens after I send photos?
You get a fixed quote and available dates. If we need another angle, we will ask.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we will plan for it.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a full day. If we find something your pictures didn’t show, we will explain it before carrying on.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Read more
Signs you need bath re-enamelling in Halstock
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.
The most common problems we’re called about are:
- Staining under the taps and around the waste
- Wear marks under the taps
- An old resurfacing that is failing
- A bath in a colour that no longer suits
Before you book anyone
- Aftercare advice
- How soon you can use it again
- Whether a trained technician does the job
- Whether the colour is mixed to match
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
What affects the price in Halstock
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- How much damage there is
- How easy the damage is to reach
- Any earlier repairs that need removing first
- How many items we do on one visit
Our prices are the same across the UK, with no extra for Halstock. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed price
Most quotes are done from pictures alone. To make it quick:
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- The material, if you know it
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why us?
- Free fixed quotes from pictures
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
- We come to you, anywhere in the UK
Read our pricing and guide to resurfacing and replacement costs.
Our work in Halstock
Halstock is about 5 miles south of Yeovil, in Somerset. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Halstock is one of 640 towns and villages in Somerset we cover.
We cover every part of the BA22 postcode area and the streets around it. We regularly work on streets such as Bransford, St Juthware Close and Yeovil Road. Other places close to Halstock include Netherstoke (1 mile north), West Chelborough (2 miles south), Pendomer (2 miles north-west), Sutton Bingham (2 miles north) and Corscombe (2 miles south-west). Larger places within reach include Yeovil (5 miles north), Chard (13 miles west), Crewkerne (6 miles west), Somerton (13 miles north), Ilminster (12 miles west) and Preston Plucknett (5 miles north).
Landmarks near Halstock
Typical jobs here are in homes near Church of St Juthware and St Mary. The closest station to Halstock is Chetnole station, roughly 3.6 miles east of the centre. Further afield, we also cover the area around Dawe's Twineworks (3.8 miles north-west) and Mohun Castle (4.4 miles west). Not far away are Abbot's Hill.
Places near Halstock
Also in Halstock
About our accreditations · Every repair comes with a one-year guarantee.
