Oxfordshire · England
Bath Re-enamelling in Nettlebed
Full bath re-enamelling and resurfacing in Nettlebed, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- A roll-top that’s seen better days
Why repair rather than replace?
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Nettlebed customers choose us
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
- Colours mixed by hand to suit your surface
Read our pricing and resurfacing vs replacement cost guide.
About our bath re-enamelling in Nettlebed
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. If you’re dealing with a coloured bath you want in white and a coating lifting around the plughole, we can help, on cast iron baths, acrylic baths and Victorian roll-tops alike.
Every job is backed for twelve months in Nettlebed and everywhere else. If something goes wrong with the work, we come back.
- Area
- Nettlebed (RG9)
- Region
- Oxfordshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Nettlebed
Also in Nettlebed
What affects the price in Nettlebed
Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:
- The material
- Doing more than one item at once
- How hard the colour is to match
- How many areas need work
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Quotes from your photos
Good pictures mean an accurate price. Here’s what we find most useful:
- A picture taken from further back
- Natural light rather than flash
- Where you are, by postcode
- The material, if you know it
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
About Nettlebed
Nettlebed is about 7 miles north of Caversham, in Oxfordshire. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Nettlebed is one of 443 places in Oxfordshire we cover. Our jobs stretch from Nettlebed to London (39 miles away).
We cover every part of RG9. Whether you live on The Ridgeway, Wanbourne Lane and Watlington Street or anywhere nearby, we can come to you. Neighbouring places we cover include Catslip (1 mile south-east), Highmoor (2 miles south), Highmoor Cross (2 miles south), Bix (2 miles south-east) and Shepherd's Green (3 miles south). We also work in nearby towns such as Didcot (11 miles west), Abingdon-on-Thames (14 miles north-west), Thame (12 miles north), Henley-on-Thames (5 miles south-east), Benson (6 miles north-west) and Chinnor (9 miles north).
Near you in Nettlebed
Around Nettlebed, we work in homes near Church of St Bartholomew, The Sun Inn Public House and Nettlebed Community School, among other places. Open spaces near Nettlebed include Warburg Nature Reserve.
The process
We turn up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the following day.
How to prepare
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
Get a quote
For a price in Nettlebed, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Your questions about bath re-enamelling in Nettlebed
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Will the new finish last?
Care for it and it lasts. Gentle cleaning, no suction mats.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
When a repair isn’t the answer
In fairness, there are a few things a repair won’t fix:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Nettlebed
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Signs you need bath re-enamelling in Nettlebed
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is generally perfectly sound.
Clients normally contact us about:
- A roll-top that’s seen better days
- An old resurfacing that is failing
- A coloured bath you want in white
- Staining under the taps and around the waste
Comparing quotes
- What prep work is covered
- What happens if the damage is worse than the pictures show
- Is the price fixed, and does it include VAT?
- How long the guarantee is and what it covers
How to care for the repair
After the repair has cured, a few habits help it last:
- Wash away dyes and oils after use
- Do not leave a chip unrepaired
- Do not use the bath until it has fully cured
- A quick wipe after use keeps limescale away
Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
