Oxfordshire · England
Bath re-enamelling & resurfacing in Bix, Oxfordshire
Our technicians come to Bix for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- An old resurfacing that’s failing
- A roll-top that’s seen better days
Bath re-enamelling at your home in Bix
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. We’re frequently asked to fix a bath that stays dull however much you clean it and thin, worn enamel in places, in acrylic baths, pressed steel baths and basins & shower trays.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Bix (RG9)
- Area hub
- Oxfordshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Bix
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Why choose Surface Doctor in Bix
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
- We leave the room as we found it
- Generally one visit, start to finish
Read our full price list and bath cost comparison.
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for a full day. Before leaving, we tell you when it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Read more
Do you need bath re-enamelling in Bix?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Typical reasons for a call-out include:
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
What to look for in a quote
- Whether the price covers travel
- What aftercare is recommended
- Whether cleaning and preparation are in the price
- Is the price fixed, and does it include VAT?
When we would advise against a repair
A few problems are outside what a surface repair can do:
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Bix: your questions answered
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Which areas do you work in?
The entire UK, including all of Oxfordshire. Send your postcode with your photos and we’ll confirm dates.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Towns and villages near Bix
Other services in Bix
Bix and the surrounding area
Bix is about 6 miles north of Caversham, in Oxfordshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Bix is one of 443 towns and villages in Oxfordshire we cover. We work right across the region, from Bix to London (about 37 miles away).
Here we cover the RG9 postcode area. That includes homes on White Lane and Rectory Lane. Neighbouring places we cover include Middle Assendon (1 mile north-east), Lower Assendon (1 mile south-east), Fawley Bottom (1 mile north-east), Catslip (2 miles north-west) and Shepherd's Green (2 miles south-west). Further out, we also cover Didcot (13 miles west), Thame (13 miles north), Henley-on-Thames (3 miles south-east), Benson (8 miles north-west), Chinnor (10 miles north) and Tilehurst (8 miles south-west).
Landmarks near Bix
Our clients here include homes close to The Fox Public House and Church of St James and the streets around them. The closest station to Bix is Henley-On-Thames station, about 2.9 miles south-east of the centre. Well-known places in the area include Frazer Nash Archives (3.2 miles south-east). For a walk, there is Warburg Nature Reserve.
What affects the price in Bix
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Unusual colours or finishes
- What kind of damage it is
- Where the damage is and how we get to it
- How many areas need work
Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- The material, if you know it
- A coin beside the damage so we can judge size
Upload pictures of the damage and a wider shot of the entire item, with your RG9 postcode, and we’ll come back with a fixed quote.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Work for landlords and builders
If you manage property in Bix, we’ll quote for several properties at once. Just send photos for each address and we will price them together.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
