Sunderland · England
Bath Re-enamelling for New Silksworth homes
Full bath re-enamelling and resurfacing in New Silksworth, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Several chips and rust patches
When we would advise against a repair
To be straight with you, some problems need a different fix:
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
How we handle bath re-enamelling in New Silksworth
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Whether it’s a coating lifting around the plughole and chips and rust in more than one place, we can normally put it right, on cast iron baths, pressed steel baths and basins & shower trays alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- New Silksworth (SR3)
- County
- Sunderland
- Cover
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in New Silksworth
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Wipe the bath dry after use in hard water areas
- Clean with a soft cloth and mild detergent
- Wash away dyes and oils after use
- Don’t leave a chip unrepaired
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
About New Silksworth
New Silksworth is about 2 miles south of Sunderland, in Sunderland. We travel to homes and businesses in New Silksworth, so nothing has to leave your home. New Silksworth is one of 75 places in Sunderland where we work. We work right across the region, from New Silksworth to Newcastle upon Tyne (12 miles away).
We cover every part of the SR3 postcode area. You will find streets such as Betony Lane, Plough Road and Moorside Road, all of which we cover. If you’re just outside New Silksworth, we cover Doxford Park (1 mile south-west), Farringdon (1 mile north-west), Gilley Law (1 mile north), East Herrington (1 mile west) and Herrington (1 mile west). Larger places within reach include Washington (5 miles north-west), Houghton-le-Spring (3 miles south-west), Sunniside (3 miles north-east), Fulwell (4 miles north), Hendon (3 miles north-east) and Ford (3 miles north). New Silksworth is one of the larger places we cover in Sunderland.
What’s near New Silksworth
Our customers here include homes close to Mill Hill Primary School, Farringdon Community Academy and Barnes Park, among other places. For rail, the closest station is Sunderland station, about 3 miles north-east. Other landmarks nearby include Grindon Museum (1.5 miles north) and Cherry Knowle Hospital (1.8 miles east). Open spaces near New Silksworth include Warden Law and WWT Washington.
- Parks and local facilities nearby include East and Middle Herrington (0.9 miles west)
How the visit works
On the day itself, there’s little for you to do. Let us in and show us the room, and we will get on with it. Most visits take a full day, including clearing up.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Before we arrive
- Clear the area around the damage
- Ensure the room can be ventilated
- Keep a parking space free if you can
How to get a price
Email us a picture of the damage and one of the whole item, and tell us you are in New Silksworth, and we’ll reply with a fixed quote.
Advice
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we take into account:
- The colour and finish to match
- How easy the damage is to reach
- How many areas need work
- The type of damage
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
How to get a fixed price
You can normally get a fixed quote without us visiting. To make it quick:
- Where you are, by postcode
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
Most clients in New Silksworth get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Should you replace it?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in New Silksworth
- Colours mixed by hand to suit your surface
- Everything repaired in place
- A year’s guarantee on all work
- We’ll tell you if it’s not worth repairing
Read our full price list or guide to resurfacing and replacement costs.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Towns and villages near New Silksworth
More services for New Silksworth
Your questions about bath re-enamelling in New Silksworth
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you quote from pictures?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Do you work in New Silksworth?
Yes. We cover the entire UK and travel to New Silksworth and the rest of Sunderland. Send photos and we will quote, or call 0345 017 0787.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
About our accreditations · Every repair comes with a one-year guarantee.
