Northumberland · England

Bath re-enamelling & resurfacing in Newbiggin-by-the-Sea, Northumberland

Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Newbiggin-by-the-Sea. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Newbiggin-by-the-Sea homes

Bath re-enamelling in Newbiggin-by-the-Sea without replacing anything

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Common call-outs are for an outdated colour you’d like to change and thin, worn enamel in places, in cast iron baths, pressed steel baths and Victorian roll-tops.

All of our repairs are guaranteed for twelve months in Newbiggin-by-the-Sea and everywhere else. We return to put right any problem with the work.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Newbiggin-by-the-Sea (NE64)
Region
Northumberland
Warranty
12 months on all our work
Quotes
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026

Looking after it afterwards

How the surface is treated afterwards matters:

  • Respect the curing time we give you
  • Store bottles off the bath
  • Do not leave a chip unrepaired
  • Never use suction bath mats

Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.

Do not try to scrub a worn bath back to shine. It removes more of the surface.

Do you need bath re-enamelling in Newbiggin-by-the-Sea?

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.

Look out for any of the following:

  • Stains that will not shift
  • A coating lifting around the plughole
  • An outdated colour you’d like to change
  • Chips and rust in more than one place

Comparing quotes

  • Is the price fixed, and does it include VAT?
  • What happens if the damage is worse than the pictures show
  • Whether they match the colour on site
  • Aftercare advice

10 questions to ask before you book

How it works

You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

Before we arrive

  • Make sure the room can be ventilated
  • Let us know if it has been repaired before
  • Avoid using the area for a few hours before we arrive

Get a quote

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and you are under no obligation.

Send pictures for a quote

Read more

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • An acrylic bath that flexes badly underfoot
  • Leaking taps or wastes (a plumber’s job)
  • Damage hidden under a previous coating, until it’s stripped back

If in doubt, send photos and we will say what we think.

Materials we repair

  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.

Where we work around Newbiggin-by-the-Sea

Newbiggin-by-the-Sea is about 2 miles east of Ashington, in Northumberland. Our repair technicians come to customers in Newbiggin-by-the-Sea, so there’s no workshop to go to. We work in 189 places in Northumberland, from the larger towns to small villages. Our jobs stretch from Newbiggin-by-the-Sea to Newcastle upon Tyne (14 miles away).

All of NE64 is within our area. You will find streets such as High Street, Woodhorn Road and Argyle Terrace. Main roads around Newbiggin-by-the-Sea include the A197 and B1334, so getting to you is simple. Neighbouring places we cover include Woodhorn (1 mile north-west), North Seaton (1 mile south-west), Ashington (2 miles west), Cambois (2 miles south) and West Sleekburn (3 miles south-west). We also work in nearby towns such as Blyth (5 miles south), Cramlington (7 miles south), Morpeth (7 miles west), Bedlington (5 miles south-west), Newsham (5 miles south) and Amble (10 miles north).

Landmarks near Newbiggin-by-the-Sea

Locally, our jobs take us to homes close to The Northumberland Church of England Academy, St Bartholomew's Church and Ink Spot pub and the streets around them. The closest station to Newbiggin-by-the-Sea is Ashington station, about 2.2 miles west. Nearby you will also find Wansbeck General Hospital (1.1 miles west) and Woodhorn Church Museum (0.7 miles north-west).

  • Other local spots include Newbiggin by the Sea Urban District (less than half a mile east)
Map of Newbiggin-by-the-Sea © OpenStreetMap contributors

What bath re-enamelling costs

Resurfacing from £350. We give every job a fixed quote from pictures. This is what makes a difference:

  • Any earlier repairs that need removing first
  • Whether we combine several jobs
  • How many areas need work
  • The colour and finish to match

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Send pictures for a quote

A couple of clear pictures is all it takes. Try to include:

  • Daylight if possible, and no flash reflection
  • Any details about the material
  • Any earlier repairs or coatings
  • A picture taken from further back

Most clients in Newbiggin-by-the-Sea get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Should you replace it?

Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day. Prices start from £350. We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • No need to remove anything
  • CHAS and Constructionline accredited
  • One visit for most repairs
  • Repair technicians who travel to you, UK-wide

See our prices page or resurfacing vs replacement cost guide.

Your questions about bath re-enamelling in Newbiggin-by-the-Sea

How long does re-enamelling take?

Most baths are done in a day, ready the next day. We’ll confirm timings when we quote.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Can you re-enamel a roll-top bath?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

Can you quote from photos?

In nearly every case. We only ask to see it in person if the photos cannot show what we need.

What does bath re-enamelling cost?

Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item and your postcode.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

Do you cover the entire of Northumberland?

We cover the whole UK, including Newbiggin-by-the-Sea and the rest of Northumberland. Send your postcode with your photos and we will offer you dates.

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.