Fife · Scotland
Bath re-enamelling & resurfacing in Newport-on-Tay, Fife
Damaged bath in Newport-on-Tay? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
How it works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to the best part of a day.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
Ask for a price
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
How we handle bath re-enamelling in Newport-on-Tay
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. We regularly repair basins & shower trays, cast iron baths and acrylic baths, and people most often call us about brown or grey marks that don’t clean off and a coloured bath you want in white.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Newport-on-Tay (DD6)
- County
- Fife
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
Why us?
- We come to you, anywhere in the UK
- One visit for most repairs
- CHAS and Constructionline accredited
- Straight answers about what a repair can do
See our prices page or bath cost comparison.
What affects the price in Newport-on-Tay
Prices start from £350. Prices are worked out job by job. The main factors are:
- Where the damage is and how we get to it
- How much damage there is
- Any earlier repairs that need removing first
- How many items we do on one visit
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- The postcode, so we can plan the visit
- A picture taken from further back
- The material, if you know it
- Any earlier repairs or coatings
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Newport-on-Tay and the surrounding area
Newport-on-Tay is about 3 miles south-east of Dundee, in Fife. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Newport-on-Tay is one of 133 places in Fife we cover. Our nearest city page is Edinburgh, about 35 miles away.
Here we cover the DD6 postcode area. From High Street, Woodmuir Terrace and Woodmuir Crescent or anywhere nearby, we can come to you. With the B946 and B995 close by, Newport-on-Tay is easy for our repair technicians to reach. Nearby, we also work in Wormit (1 mile south-west), Drumoig (2 miles south-east), Pickletillum (2 miles south-east), West End (2 miles north-west) and Blackness (3 miles north-west). Further out, we also cover St Andrews (9 miles south-east), Cupar (8 miles south), Tayport (3 miles east), Auchtermuchty (15 miles south-west), Leuchars (4 miles south-east) and Ladybank (13 miles south-west).
Landmarks near Newport-on-Tay
Our customers here include homes close to Trinity United Free Church, Newport Primary School and Slessor Gardens. The nearest railway station is Dundee station, roughly 1.8 miles north-west. A little further out are Overgate Centre (2 miles north-west) and Discovery Point (1.7 miles north-west). Not far away are Balgay Hill and Trottick Mill Ponds.
FAQs for Newport-on-Tay
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
How do I get a price for bath re-enamelling in Newport-on-Tay?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Newport-on-Tay.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Common problems we fix in Newport-on-Tay
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Common reasons people in Newport-on-Tay contact us include:
- Stains that won’t shift
- A period or roll-top bath worth keeping
- A coloured bath you want in white
- Chips and rust in more than one place
What to look for in a quote
- If travel is included in the price
- How changes to the job are handled
- What protection goes down before work starts
- When it can be used again
Also in Newport-on-Tay
Landlords, agents and businesses in Newport-on-Tay
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
We regularly work with letting and managing agents. Send the address, photos and access details.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
What we cannot put right
Before booking, it’s worth knowing the limits:
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that’s cracked right through
- Plumbing leaks, which need a plumber
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
