Fife · Scotland
Bath Re-enamelling in Wormit
Full bath re-enamelling and resurfacing at your home in Wormit, with a one-year guarantee on every repair.
- Resurfacing from £350
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
Bath re-enamelling in Wormit without replacing anything
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Our technicians work on Victorian roll-tops, cast iron baths and basins & shower trays, and the jobs we see most are several chips and rust patches and an original cast iron bath that needs restoring.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Wormit (DD6)
- Region
- Fife
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Wormit questions
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What areas do you cover?
The entire UK, including all of Fife. Send your postcode with your pictures and we will offer you dates.
Do you cover Wormit?
Yes. We work across the UK and travel to Wormit. Send photos and we’ll quote, or call 0345 017 0787.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How much does bath re-enamelling cost in Wormit?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Wormit.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Places near Wormit
Also in Wormit
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to a full day, including clearing up.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
What affects the price in Wormit
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- How many items we do on one visit
- Any earlier repairs that need removing first
- What kind of damage it is
- How much damage there is
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed quote
Phone photos are fine, there is no need for anything special. Ensure they show:
- Details of any past repairs
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
If you’re in Wormit and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
What we’re called out for in Wormit
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
If you can see any of these, send us a picture:
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- Thin, worn enamel in places
- Enamel that is lost its shine and feels rough
What your quote should include
- What happens if the damage is worse than the pictures show
- How soon you can use it again
- How your room will be protected
- Whether cleaning and preparation are in the price
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Use washing-up liquid and a soft cloth
- Have chips seen to early
- Don’t use the bath until it has fully cured
- Wash away dyes and oils after use
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Wormit and nearby
Wormit is about 3 miles south of Blackness, in Fife. Whether you’re in the middle of Wormit or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 133 places across Fife, from the larger towns to small villages. Our nearest city page is Edinburgh, about 34 miles away.
Jobs in DD6 work the same way as everywhere else we cover. Local streets include Bay Road, Flass Road and Kilmany Road, and we cover them all. We also travel to Newport-on-Tay (1 mile north-east), West End (2 miles north), Blackness (3 miles north), Pickletillum (3 miles east) and Drumoig (3 miles east). Larger places within reach include St Andrews (9 miles south-east), Cupar (7 miles south), Tayport (4 miles north-east), Kennoway (15 miles south), Auchtermuchty (13 miles south-west) and Leuchars (5 miles south-east).
What’s near Wormit
Typical jobs here are in homes near Harris Academy, among other places. The nearest railway station is Dundee station, about 2.3 miles north of the centre. A little further out are Naughton Castle (1.6 miles south-west) and Dundee Dental Hospital (2.5 miles north). Open spaces near Wormit include Trottick Mill Ponds and Balgay Hill.
Repairing versus replacing in Wormit
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the whole surface with the bath left where it is. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why book with us
- Honest advice, even when it means no job
- We come to you, anywhere in the UK
- Same prices wherever you are
- Free fixed quotes from pictures
See our full price list and resurfacing vs replacement cost guide.
When we’d advise against a repair
Before booking, it’s worth knowing the limits too:
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that is cracked right through
Send us photos and we will tell you honestly.
Materials we work on in Wormit
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
