Fife · Scotland
Bath re-enamelling & resurfacing in Tayport, Fife
Bath re-enamelling in and around Tayport: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
Bath re-enamelling at your home in Tayport
The bath stays where it is, so the taps, tiles and plumbing are not touched. It generally takes one visit, with the bath ready to use the following day. We work on cast iron baths, pressed steel baths and basins & shower trays, and common reasons people get in touch are a coating lifting around the plughole and a bath that stays dull however much you clean it.
Big or small, it’s backed by a one-year guarantee in Tayport and across Fife.
- Area
- Tayport (DD6)
- Region
- Fife
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Also near Tayport
Other services in Tayport
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
How it works
Your technician turns up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and the room is left clean and tidy.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the next day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
Landlord and trade work in Tayport
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
For anyone letting property in or around Tayport, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Common questions in Tayport
Can you re-enamel a roll-top bath?
Yes. Inside and out.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Tayport.
What areas do you cover?
We cover the whole UK, including Tayport and the rest of Fife. Send your postcode with your photos and we’ll offer you dates.
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- How easy the damage is to reach
- The material
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
A repair is priced on what needs doing, not where you live. You’ll see the full price before you book.
How to get a fixed quote
It only takes a minute to photograph the damage. Please include:
- A close-up of the damage, in focus
- What it’s made of, if you know
- The postcode, so we can plan the visit
- Natural light rather than flash
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Our work in Tayport
Tayport is about 2 miles south of Broughty Ferry, in Fife. Across the DD6 area, we carry out the work at your property. We work in 133 places across Fife. We work right across the region, from Tayport to Edinburgh (37 miles away).
Every address in DD6 is within our area, from the main roads to the quietest streets. Local streets include Whitenhill, Grey Street and Provost Road, and we cover them all. Tayport is on the B945 and B946, so it’s easy for us to reach. Other places close to Tayport include Broughty Ferry (2 miles north), Barnhill (2 miles north-east), Douglas (2 miles north-west), Craigiebank (2 miles north-west) and Drumoig (2 miles south-west). Further out, we also cover St Andrews (8 miles south), Cupar (10 miles south-west), Leuchars (5 miles south), Ladybank (15 miles south-west), Newburgh (15 miles south-west) and Wormit (4 miles south-west).
Around Tayport
Locally, our jobs take us to homes close to Grove Academy, Morton Lochs and Tayport Old Parish Church. Tayport’s nearest station is Broughty Ferry station, roughly 1.4 miles north of the centre. Well-known places in the area include Wellgate Centre (3.6 miles west) and Tayport Castle (under half a mile north). Not far away are Trottick Mill Ponds.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A bath that is rusted through
- Problems we cannot see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Tayport
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
How to care for the repair
After the repair has cured, a few habits help it last:
- Dry the bath after use to stop limescale
- A dripping tap should be fixed promptly
- Avoid suction-cup mats
- Do not let dyes or oils sit on the finish
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
When to call us in Tayport
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
If you can see any of these, send us a photo:
- An old resurfacing that’s failing
- Wear marks under the taps
- Staining under the taps and around the waste
- A coloured bath you want in white
Before you book anyone
- Whether there are any call-out or travel charges
- Aftercare advice
- How the room is protected while they work
- What happens if the damage is worse than the pictures show
About our accreditations · Every repair comes with a one-year guarantee.
