Stockton-on-Tees · England
Bath Re-enamelling in Newton Bewley
Problem with your bath in Newton Bewley? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- Wear marks under the taps
Aftercare tips
To keep it looking its best:
- Do not let dyes or oils sit on the finish
- Repair dripping taps early
- Do not leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Bath re-enamelling at your home in Newton Bewley
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. If you’re dealing with a peeling or bubbling previous coating and worn patches where water runs and sits, we can help, on basins & shower trays, cast iron baths and Victorian roll-tops alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Newton Bewley (TS22)
- County
- Stockton-on-Tees
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Questions from Newton Bewley
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
How long is the bath unusable?
Most baths are done in a day, ready the day after. We’ll confirm timings when we quote.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
Do you come to Newton Bewley?
Yes, we do. Technicians travel to Newton Bewley from across the region, and the price is the same as everywhere else.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Landlords, agents and businesses in Newton Bewley
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Landlords, letting agents and housing providers in Newton Bewley use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
How it works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for a full day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
Get a quote
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
What affects the price in Newton Bewley
Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:
- Access to the area
- What kind of damage it is
- The material
- The size and number of damaged areas
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what helps:
- Any details about the material
- Any earlier repairs or coatings
- Natural light rather than flash
- One sharp close-up of the damage
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Where we work around Newton Bewley
Newton Bewley is about 1 mile north of Billingham, in Stockton-on-Tees. Whether you are in the middle of Newton Bewley or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Newton Bewley is one of 31 towns and villages in Stockton-on-Tees where we work. We work right across the region, from Newton Bewley to Newcastle upon Tyne (28 miles away).
Our repair technicians cover all of TS22. Other places close to Newton Bewley include Billingham (1 mile south), Cowpen Bewley (2 miles south-east), Greatham (2 miles east), Owton Manor (3 miles north-east) and Dalton Piercy (3 miles north). Larger places within reach include Stockton-on-Tees (4 miles south-west), Ingleby Barwick (8 miles south), Thornaby-on-Tees (6 miles south), Yarm (10 miles south), Egglescliffe (8 miles south) and Elm Tree Farm (5 miles south-west).
Around Newton Bewley
In Newton Bewley, that means homes near Bede College, Billingham Campus School and Arts College and Bewley Primary School, among other places. Newton Bewley’s nearest station is Billingham station, about 1.9 miles south. Further afield, we also cover the area around Hospital of God (1.7 miles east) and Billingham Art Gallery (1.8 miles south). For a walk, there is Seaton Snook and RSPB Salthome.
Places near Newton Bewley
What else we do in Newton Bewley
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Newton Bewley clients choose us
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- No extra charge for your area
Take a look at our prices page and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
