Stockton-on-Tees · England
Bath Re-enamelling in Elm Tree Farm
We travel to Elm Tree Farm for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Worn patches where water runs and sits
Bath re-enamelling in Elm Tree Farm, done in place
The bath stays where it is, so the taps, tiles and plumbing are not touched. It normally takes one visit, and can be used again the day after. If you are dealing with an original cast iron bath that needs restoring and a coloured bath you want in white, we can generally put it right, whatever the material.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Elm Tree Farm (TS19, TS18)
- County
- Stockton-on-Tees
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Elm Tree Farm
It’s been repaired before. Can you still fix it?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
How long is the bath unusable?
One day for most baths, ready the day after. We give you timings with the quote.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is there a call-out fee?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Also near Elm Tree Farm
More services for Elm Tree Farm
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
When we’d advise against a repair
It helps to know what we cannot do too:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
What affects the price in Elm Tree Farm
Prices start from £350. There’s no area surcharge for Elm Tree Farm. What changes the price is:
- Previous DIY repairs that have to come out
- How many items we do on one visit
- How much damage there is
- Access to the area
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from photos
Two or three clear photos are usually enough. It helps if you send:
- A clear, close picture of the problem area
- A wider photo showing the entire bath
- Details of any past repairs
- Any details about the material
For a price in Elm Tree Farm, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
When to call us in Elm Tree Farm
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Customers usually contact us about:
- A dull, rough surface that won’t come clean
- An outdated colour you’d like to change
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
Comparing quotes
- How your room will be protected
- Whether the colour is mixed to match
- Whether a trained technician does the job
- What the guarantee covers, and for how long
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
How to look after the repair
To keep it looking its best:
- Repair dripping taps early
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
What we do, step by step
The work is clean and fairly quiet. We protect the area first, then the job itself takes a full day. Before we leave, we explain the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Advice
Where we work around Elm Tree Farm
Elm Tree Farm is about 1 mile west of Stockton-on-Tees, in Stockton-on-Tees. Wherever you are in the TS19 postcode area, we come to you. We work in all 31 towns and villages across Stockton-on-Tees, from the larger towns to small villages. Our jobs stretch from Elm Tree Farm to Newcastle upon Tyne (about 31 miles away).
Every address in TS19 and TS18 is within our area, from the main roads to the quietest streets. Streets in the area include Leam Lane, The Avenue and Poppy Lane. Neighbouring places we cover include Bishopsgarth (1 mile north-west), Hardwick (1 mile north), Fairfield (1 mile south), Stockton-on-Tees (1 mile east) and Roseworth (1 mile north). Within a short drive, we also cover Billingham (4 miles north-east), Ingleby Barwick (4 miles south), Thornaby-on-Tees (3 miles south-east), Yarm (5 miles south), Egglescliffe (4 miles south) and Wynyard (5 miles north). Being one of Stockton-on-Tees’s larger places, Elm Tree Farm is somewhere we visit often.
Near you in Elm Tree Farm
Our clients here include homes close to St Paul, Trinity Green and Our Lady and St Bede Catholic Academy, among other places. Nearby too are Whitehouse Primary School (less than half a mile east) and The Grangefield Academy (0.7 miles south-east). Elm Tree Farm’s nearest station is Stockton station, roughly 1.4 miles east of the centre. Nearby you’ll also find Yarm Castle (4.7 miles south) and University Hospital of North Tees (0.6 miles north).
About our accreditations · Every repair comes with a one-year guarantee.
