Northamptonshire · England
Bath re-enamelling & resurfacing in Newton Bromswold, Northamptonshire
Bath re-enamelling in Newton Bromswold without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
How we handle bath re-enamelling in Newton Bromswold
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We’re frequently asked to fix an original cast iron bath that needs restoring and an old resurfacing that’s failing, across pressed steel baths, cast iron baths and Victorian roll-tops.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Newton Bromswold (NN10)
- County
- Northamptonshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Newton Bromswold
Newton Bromswold is about 3 miles east of Rushden, in Northamptonshire. Clients in Newton Bromswold get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Newton Bromswold is one of 364 towns and villages in Northamptonshire we cover. Our jobs stretch from Newton Bromswold to London (57 miles away).
Postcode districts we cover here: NN10. Whether you live on Church Walk, Church Lane and Rushden Road or a nearby road, we can come to you. Neighbouring places we cover include Yelden (1 mile north-east), Knotting (1 mile south), Knotting Green (2 miles south), Rushden (3 miles west) and Souldrop (3 miles south). Larger places within reach include Northampton (15 miles west), Kettering (11 miles north-west), Wellingborough (7 miles west), Raunds (4 miles north), Moulton (13 miles west) and Irthlingborough (4 miles north-west).
Near you in Newton Bromswold
Our clients here include homes close to The Ferrers School, Church of St Peter and Higham Park, among other places. Nearby you will also find Podington Castle (3.9 miles south-west) and Rushden Lakes (3.9 miles west). Open spaces near Newton Bromswold include Sharnbrook Summit.
Your questions about bath re-enamelling in Newton Bromswold
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Do you cover the whole of Northamptonshire?
Everywhere in the UK, Newton Bromswold included. Travel is included in the price.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day, with the bath back in use the following day. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why Newton Bromswold customers choose us
- Same prices wherever you are
- Every repair guaranteed for a year
- Colours mixed by hand to suit your surface
- Repair technicians who travel to you, UK-wide
Read our full price list and bath cost comparison.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair cannot fix:
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
How it works
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a full day. We leave the room clean and ready to use once it has cured.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
How to get a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
Advice
What we are called out for in Newton Bromswold
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Clients generally contact us about:
- Several chips and rust patches
- An outdated colour you’d like to change
- Worn patches where water runs and sits
- Stains that won’t shift
What to look for in a quote
- Whether the price covers travel
- Aftercare advice
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- Leave the bath for the full curing time before using it
- Wash away dyes and oils after use
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Towns and villages near Newton Bromswold
Other services in Newton Bromswold
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
