Bedford Borough · England
Bath Re-enamelling for Yelden homes
Full bath re-enamelling and resurfacing in Yelden, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- An original cast iron bath that needs restoring
How the visit works
We turn up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take the best part of a day, and we leave the room as we found it.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the day after.
How to prepare
- Point us to the nearest place to park
- Let us know if it has been repaired before
- Ensure the room can be ventilated
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Advice
About our bath re-enamelling in Yelden
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the following day. Common call-outs are for enamel that’s lost its shine and feels rough and thin, worn enamel in places, across acrylic baths, cast iron baths and basins & shower trays.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Yelden (MK44)
- County
- Bedford Borough
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Yelden
What else we do in Yelden
Yelden questions
Are there extra charges for Yelden?
Travel is included in the price, and we charge the same wherever you are.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Do you come to Yelden?
Yes, we do. We send a technician to Yelden for every job, with no extra charge for travel.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How do I get a price for bath re-enamelling in Yelden?
Prices start from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item with your MK44 postcode.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Signs you need bath re-enamelling in Yelden
Often the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is generally perfectly sound.
If you can see any of these, send us a photo:
- Several chips and rust patches
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
What to look for in a quote
- Whether a trained technician does the job
- How long it needs to cure
- What aftercare is recommended
- Whether the price covers travel
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we take into account:
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- The material
- How many areas need work
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- Where you are, by postcode
- Daylight if possible, and no flash reflection
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Use washing-up liquid and a soft cloth
- Don’t use the bath until it has fully cured
- Rinse off hair dye, oils and bath bombs right away
- Dry the bath after use to stop limescale
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Where we work around Yelden
Yelden is about 3 miles east of Rushden, in Bedford Borough. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Yelden is one of 94 towns and villages in Bedford Borough where we work. Our nearest city page is London, about 58 miles away.
We cover every part of MK44 and the streets around it. Whether you live on High Street, Church Lane and Forge Gardens or anywhere nearby, we can come to you. Close by, we cover Newton Bromswold (1 mile south-west), Knotting (2 miles south), Knotting Green (3 miles south), Rushden (3 miles west) and Souldrop (4 miles south-west). We also work in nearby towns such as Bedford (11 miles south), Kempston (12 miles south), Cauldwell (12 miles south), Wixams (15 miles south), Wootton (14 miles south) and Goldington (11 miles south).
What’s near Yelden
Our customers here include homes close to Church of St Mary the Virgin. Nearby you will also find Rushden Museum (3.5 miles west) and Dean (2.7 miles east). Open spaces near Yelden include Sharnbrook Summit.
What a repair cannot fix
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
If in doubt, send photos and we will say what we think.
What we work on
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
If you manage property in Yelden, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
