North Yorkshire · England
Bath re-enamelling & resurfacing in Newton-on-Rawcliffe, North Yorkshire
Full bath re-enamelling and resurfacing at your home in Newton-on-Rawcliffe, with a one-year guarantee on every repair.
- Resurfacing from £350
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
When a repair is not the answer
A few problems are outside what a surface repair can do:
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
About our bath re-enamelling in Newton-on-Rawcliffe
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We regularly repair cast iron baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are thin, worn enamel in places and a bath in a colour that no longer suits.
Big or small, you get the same one-year guarantee.
- Location
- Newton-on-Rawcliffe (YO18)
- Area hub
- North Yorkshire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. There’s no charge for travel to Newton-on-Rawcliffe. The price comes down to:
- How hard the colour is to match
- How easy the damage is to reach
- How much damage there is
- Whether old repairs or coatings need taking off
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.
How to get a fixed quote
Before you send photos, a few simple things make all the difference:
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- Details of any past repairs
- Daylight if possible, and no flash reflection
To get a price, send two or three photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
More services for Newton-on-Rawcliffe
Newton-on-Rawcliffe and the surrounding area
Newton-on-Rawcliffe is about 14 miles south-west of Whitby, in North Yorkshire. Jobs in Newton-on-Rawcliffe are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Newton-on-Rawcliffe is one of 626 places in North Yorkshire we cover. We work right across the region, from Newton-on-Rawcliffe to Leeds (about 47 miles away).
All of YO18 is within our area. Other places close to Newton-on-Rawcliffe include Levisham (1 mile east), Yatts (1 mile south), Lockton (2 miles east), Stape (2 miles north-west) and Newbridge (3 miles south). We also work in nearby towns such as Scarborough (14 miles east), Whitby (14 miles north-east), Falsgrave (14 miles east), Malton (11 miles south), Pickering (4 miles south) and Northstead (14 miles east).
Near you in Newton-on-Rawcliffe
We visit homes around St John's Church, among other places. A little further out are Pickering Castle (3.7 miles south) and Beck Isle Museum (3.9 miles south).
What we are called out for in Newton-on-Rawcliffe
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Send us a photo if you notice any of these:
- Lots of chips and rust spots
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
What your quote should include
- How soon you can use it again
- If travel is included in the price
- How changes to the job are handled
- What protection goes down before work starts
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
How it works
Arrival times are agreed in advance, so you know when to expect us. On site, it takes a full day in most cases. The room is left tidy and you will know when it can be used.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
How to prepare
- Mention any parking restrictions or tricky access
- Make sure the room can be ventilated
- Keep a parking space free if you can
Get a quote
Send us photos of the damage and one of the whole item, with your YO18 postcode, and we will reply with a fixed price.
Advice
Should you replace it?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the whole surface without moving it. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Newton-on-Rawcliffe customers choose us
- Honest advice, even when it means no job
- One price list for the entire UK
- Technicians who travel to you, UK-wide
- Colour mixed on the day to match
Take a look at our prices page or bath cost comparison.
Newton-on-Rawcliffe: your questions answered
Are there extra charges for Newton-on-Rawcliffe?
We don’t add a call-out fee. The fixed price covers the visit and the work.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Looking after it afterwards
To keep it looking its best:
- Get any chip repaired quickly
- Keep suction mats out of the bath
- Do not leave bottles, razors or sponges standing on the surface
- Clean with a soft cloth and mild detergent
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, photos and access details.
We carry out planned and one-off repairs for housing associations and facilities teams in North Yorkshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
