Highland · Scotland
Bath Re-enamelling for Nigg homes
Bath re-enamelling in and around Nigg: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
For landlords and businesses
We are used to working with agents and managing companies. Send the address, photos and access details.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Bath re-enamelling in Nigg without replacing anything
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Whether it’s lots of chips and rust spots and staining under the taps and around the waste, we can typically put it right, whatever the material.
A one-year guarantee comes as standard.
- Location
- Nigg (IV19)
- County
- Highland
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We clean up when we are done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Tell us about parking, stairs or access
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Read more
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Don’t let dyes or oils sit on the finish
- Never use suction bath mats
- Respect the curing time we give you
- Have chips seen to early
Dry the bath after use if possible, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Questions from Nigg
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Do you cover the whole of Highland?
Across the UK, and that includes Nigg. Prices do not change with location.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
What else we do in Nigg
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why Nigg customers choose us
- Normally one visit, start to finish
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
- Rooms protected and left tidy
Read our full price list and resurfacing vs replacement cost guide.
Our work in Nigg
Nigg is about 11 miles north-west of Nairn, in Highland. Whether you are in the middle of Nigg or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 253 towns and villages across Highland, from the larger towns to small villages.
Here we cover the IV19 postcode area. Nearby, we also work in Pitcalnie (1 mile north-east), Arabella (3 miles north), Cromarty (3 miles south), Milton (3 miles north-west) and Kilmuir (3 miles west). Within a short drive, we also cover Nairn (11 miles south-east), Tain (7 miles north), Alness (9 miles west), Dornoch (11 miles north), Invergordon (6 miles west) and Fortrose (11 miles south-west). Remote and island addresses take a little more planning, so call us to arrange it.
What’s near Nigg
In Nigg, that means homes near Church of Scotland Parish Church and the streets around them. Nigg’s nearest station is Fearn station, about 4.1 miles north of the centre. Well-known places in the area include Hugh Miller Museum & Birthplace Cottage (2.8 miles south) and County Community Hospital (5.4 miles west).
Do you need bath re-enamelling in Nigg?
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is typically perfectly sound.
Customers normally contact us about:
- Lots of chips and rust spots
- A roll-top that is seen better days
- A bath in a colour that no longer suits
- Wear marks under the taps
What your quote should include
- How the colour is matched
- How changes to the job are handled
- How your room will be protected
- What the guarantee covers, and for how long
When a repair isn’t the answer
We won’t take on work that will not last, so these are the limits:
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
