Highland · Scotland
Bath re-enamelling & resurfacing in Milton, Highland
Bath re-enamelling across Milton and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
About our bath re-enamelling in Milton
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Typical jobs include an outdated colour you’d like to change and a roll-top that’s seen better days, in basins & shower trays, pressed steel baths and Victorian roll-tops.
Every job is backed for twelve months in Milton and everywhere else. If something goes wrong with the work, we come back.
- Where
- Milton (IV18)
- Region
- Highland
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
Before booking, it’s worth knowing the limits too:
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
When to call us in Milton
Many baths we resurface have simply been well used. The body of the bath is usually perfectly sound.
Look out for these signs:
- A coating lifting around the plughole
- Staining under the taps and around the waste
- Several chips and rust patches
- Wear marks under the taps
Comparing quotes
- How the room is protected while they work
- What the guarantee covers, and for how long
- How long it needs to cure
- How to care for the finish
What bath re-enamelling costs
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- How much damage there is
- What the surface is made of
- How hard the colour is to match
- What kind of damage it is
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send photos for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- The material, if you know it
- Where you are, by postcode
- One picture of the entire bath
- A coin beside the damage so we can judge size
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
How it works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes most of the day. We clean up when we are done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep children and pets away from the room on the day
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
How to get a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We will say immediately whether it can be repaired.
Advice
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Repair dripping taps early
- Get any chip repaired quickly
- Never use suction bath mats
- Respect the curing time we give you
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- CHAS and Constructionline accredited
- Colour mixed on the day to match
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
Read our full price list and resurfacing vs replacement cost guide.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Questions from Milton
How do I get a price for bath re-enamelling in Milton?
Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your IV18 postcode.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Do you cover Milton?
Yes. We cover the entire UK and come to Milton and the rest of Highland. Send us photos for a fixed quote, or call 0345 017 0787.
How durable is a resurfaced bath?
Care for it and it lasts. Gentle cleaning, no suction mats.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote and the next dates we have.
Do you cover the whole of Highland?
All of Highland, and the rest of the UK. There is no extra charge for travel.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Also in Milton
Milton and the surrounding area
Milton is about 13 miles north-west of Nairn, in Highland. Jobs in Milton are booked in like any other job: a fixed quote from photos, then a visit to do the work. Milton is one of 253 places in Highland we cover.
Jobs in IV18 are booked in the same way as anywhere else. You will find streets such as Old Station Road, Ross Crescent and Urquhart Close. Close by, we cover Kildary (1 mile north-east), Kilmuir (1 mile south-west), Barbaraville (2 miles south-west), Arabella (3 miles north-east) and Nigg (3 miles south-east). Larger places within reach include Nairn (13 miles south-east), Tain (5 miles north), Alness (7 miles south-west), Dornoch (10 miles north), Invergordon (5 miles south-west) and Fortrose (11 miles south). If you’re somewhere remote, call first so we can plan the visit.
Landmarks near Milton
In Milton, that means homes near Church, among other places. For rail, the closest station is Fearn station, about 4 miles north-east. Nearby you’ll also find County Community Hospital (4.2 miles south-west) and Milntown Castle (0.6 miles south-east).
About our accreditations · Every repair comes with a one-year guarantee.
