Staffordshire · England
Bath re-enamelling & resurfacing in No Man's Heath, Staffordshire
Problem with your bath in No Man's Heath? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Wear marks under the taps
- A coating lifting around the plughole
Bath re-enamelling in No Man's Heath, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Common call-outs are for a peeling or bubbling previous coating and a bath that stays dull however much you clean it, across acrylic baths, pressed steel baths and cast iron baths.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- No Man's Heath (B79)
- Area hub
- Staffordshire
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. Prices are worked out job by job. The main factors are:
- The colour and finish to match
- What kind of damage it is
- Previous DIY repairs that have to come out
- The material and finish
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Quotes from your photos
When you take your pictures, these tips help us give you a firm price:
- Where you are, by postcode
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
The quickest way to a price is to send two or three pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Places near No Man's Heath
What else we do in No Man's Heath
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
For landlords and businesses
We are used to working with agents and managing companies. Send the address, pictures and access details and we will handle the rest.
If you manage property in No Man's Heath, we will quote for several properties at once. Send photos for each one and we will price them together.
What we can’t put right
It helps to know what we cannot do too:
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we’ll tell you honestly.
What we work on
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
No Man's Heath and nearby
No Man's Heath is about 6 miles north-east of Tamworth, in Staffordshire. Whether you are in the middle of No Man's Heath or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. No Man's Heath is one of 512 towns and villages in Staffordshire where we work. Our nearest city page is Birmingham, about 20 miles away.
Our technicians cover all of B79. We regularly work on streets such as Ash Lane and Austrey Lane. Neighbouring places we cover include Newton Regis (1 mile south-west), Appleby Parva (1 mile east), Austrey (1 mile south), Chilcote (2 miles north) and Appleby Magna (2 miles east). Further out, we also cover Burton upon Trent (9 miles north), Tamworth (6 miles south-west), Lichfield (11 miles west), Burntwood (15 miles west), Horninglow (11 miles north) and Stowe (10 miles west).
Local landmarks in No Man's Heath
In No Man's Heath, that means homes near Newton Regis CofE Primary School and Saint Mary the Virgin and the streets around them. The closest station to No Man's Heath is Polesworth station, roughly 3.9 miles south-west. Further afield, we also cover the area around The Midland Motor Museum (2.2 miles north-east).
How to care for the repair
How the surface is treated afterwards matters:
- Avoid suction-cup mats
- Do not leave a chip unrepaired
- Repair dripping taps early
- Leave the bath for the full curing time before using it
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Your questions about bath re-enamelling in No Man's Heath
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Can you quote from photos?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
What happens after I send photos?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.
Repair or replace in No Man's Heath?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, with the bath ready the next day. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
Why choose Surface Doctor in No Man's Heath
- Free fixed quotes from pictures
- Technicians who travel to you, UK-wide
- One price list for the whole UK
- Nothing taken out or refitted
See our full price list and bath cost comparison.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes the best part of a day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
Ask for a price
Email us a photo of the damage and a wider shot of the whole item, and tell us you are in No Man's Heath, and we’ll come back with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
