Staffordshire · England
Bath Re-enamelling for Newton Regis homes
Our technicians come to Newton Regis for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A roll-top that’s seen better days
- An outdated colour you’d like to change
Covering Newton Regis
Newton Regis is about 5 miles north-east of Tamworth, in Staffordshire. Anywhere in B79, we carry out the work at your property. Newton Regis is one of 512 places in Staffordshire where we work. Our jobs stretch from Newton Regis to Birmingham (18 miles away).
Our technicians cover all of B79 and the streets around it. From Austrey Lane, St Marys Grove and Wilson Close or a nearby road, a technician can come to you. Neighbouring places we cover include Austrey (1 mile south-east), No Man's Heath (1 mile north-east), Appleby Parva (2 miles north-east), Little Orton (2 miles south-east) and Chilcote (2 miles north). Larger places within reach include Burton upon Trent (10 miles north), Tamworth (5 miles south-west), Lichfield (10 miles west), Burntwood (14 miles west), Horninglow (11 miles north) and Stowe (10 miles west).
Near you in Newton Regis
Locally, our jobs take us to homes close to Church of St Mary, Queens Head pub and Newton Regis CofE Primary School and the streets around them. Newton Regis’s nearest station is Polesworth station, roughly 2.8 miles south of the centre. A little further out are Statfold Barn Railway and Museum (2.4 miles west).
Bath re-enamelling at your home in Newton Regis
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. If you are dealing with enamel that’s lost its shine and feels rough and lots of chips and rust spots, we can generally put it right, whatever the material.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Newton Regis (B79)
- Region
- Staffordshire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Newton Regis
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Send us a picture if you notice any of these:
- An outdated colour you’d like to change
- A roll-top that is seen better days
- An old resurfacing that’s failing
- A dull, rough surface that won’t come clean
Questions to ask before booking
- What aftercare is recommended
- Whether the colour is mixed to match
- What happens if the damage is worse than the pictures show
- How long it needs to cure
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Newton Regis. The price comes down to:
- The size and number of damaged areas
- Unusual colours or finishes
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
Our prices are the same across the UK, so there’s no premium for Newton Regis. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what helps:
- Natural light rather than flash
- One picture of the whole bath
- The postcode, so we can plan the visit
- The material, if you know it
Most customers in Newton Regis get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
The process
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the job itself takes most of the day. Before we leave, we explain how soon it can be used and how to care for it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Clear the area around the damage
Getting a price
For a price in Newton Regis, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Newton Regis questions
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Leave the bath for the full curing time before using it
- Wipe the bath dry after use in hard water areas
- Rinse off hair dye, oils and bath bombs straight away
- Keep toiletries on a shelf rather than in the bath
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Nearby places to Newton Regis
Other services in Newton Regis
Repair or replace: which is better?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Resurfacing gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
What you get with us
- No need to remove anything
- Straight answers about what a repair can do
- Repair technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
