Northumberland · England
Bath Re-enamelling for North Blyth homes
Our repair technicians come to North Blyth for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A coloured bath you want in white
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Repair dripping taps early
- Don’t leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
- Do not leave a chip unrepaired
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Bath re-enamelling in North Blyth, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. If you’re dealing with worn patches where water runs and sits and a roll-top that’s seen better days, we can typically put it right, whatever the material.
Every repair comes with our one-year guarantee, wherever you are in Northumberland.
- Area
- North Blyth (NE24)
- Area hub
- Northumberland
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When we would advise against a repair
A repair isn’t right for every job, including:
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
If in doubt, send photos and we will say what we think before booking.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Covering North Blyth
North Blyth is about 1 mile north-east of Blyth, in Northumberland. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. North Blyth is one of 189 places in Northumberland where we work. Our jobs stretch from North Blyth to Newcastle upon Tyne (11 miles away).
We cover every part of the NE24 postcode area. You’ll find streets such as Dale Street, Worsdell Street and Gray Street, and we cover them all. Close by, we cover Blyth (1 mile south-west), Cowpen (1 mile south-west), East Sleekburn (1 mile north-west), Cambois (2 miles north) and Newsham (2 miles south). We also work in nearby towns such as Cramlington (4 miles south-west), Ashington (4 miles north-west), Morpeth (7 miles west), Bedlington (3 miles west), Amble (14 miles north) and Ponteland (12 miles south-west).
What’s near North Blyth
Around North Blyth, we work in homes near Central Methodist Church, Howay Inn and Morpeth Road Academy. The nearest railway station is Blyth Bebside station, roughly 2 miles west of the centre. A little further out are Blyth Community Hospital (0.6 miles south-west) and Blyth Valley (0.7 miles south-west).
Landlord and trade work in North Blyth
Housing associations and facilities teams use us for planned and reactive repairs in Northumberland and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Your questions about bath re-enamelling in North Blyth
What areas do you cover?
We work UK-wide, so North Blyth is covered. Prices do not change with location.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- Fixed prices from your pictures
- No need to remove anything
- Colours mixed by hand to suit your surface
- We will tell you if it’s not worth repairing
Take a look at our full price list or resurfacing vs replacement cost guide.
Places near North Blyth
Also in North Blyth
How the visit works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to the best part of a day, tidy-up included.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the following day.
How to prepare
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
- Make sure the room can be ventilated
Get a quote
Email us a photo of the damage and a wider shot of the whole item, with your NE24 postcode, and we’ll come back with a fixed quote.
Read more
Signs you need bath re-enamelling in North Blyth
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
These are the problems we are asked about most:
- A dull, rough surface that won’t come clean
- A coloured bath you want in white
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
Comparing quotes
- Aftercare advice
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
- If travel is included in the price
About our accreditations · Every repair comes with a one-year guarantee.
