Fife · Scotland
Bath Re-enamelling in North Queensferry
Damaged bath in North Queensferry? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- Stains that will not shift
Common problems we fix in North Queensferry
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
If you can see any of these, send us a picture:
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- An old resurfacing that’s failing
- An outdated colour you’d like to change
Comparing quotes
- What happens if they find more damage
- Is the price fixed, and does it include VAT?
- How long the guarantee is and what it covers
- Whether a trained technician does the job
Bath re-enamelling in North Queensferry without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We are often asked to fix lots of chips and rust spots and a roll-top that’s seen better days, on acrylic baths, cast iron baths and pressed steel baths.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Where
- North Queensferry (KY11)
- Region
- Fife
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
A replacement often means several trades over several days. Resurfacing takes one technician and typically a day. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with no extras added later.
Why us?
- We will tell you if it’s not worth repairing
- Colour-matched on site
- One-year guarantee on every repair
- Usually one visit, start to finish
Take a look at our full price list and bath cost comparison.
About North Queensferry
North Queensferry is about 4 miles south of Dunfermline, in Fife. Customers in North Queensferry get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. North Queensferry is one of 133 places in Fife where we work. You can also see our page for Edinburgh, about 9 miles away.
Postcode districts we cover here: KY11. Streets in the area include Main Street, Mount Hooly Crescent and Queen Margaret's Place, all of which we cover. Neighbouring places we cover include Jamestown (1 mile north-east), Inverkeithing (1 mile north), Hillend (2 miles north), Dalgety Bay (2 miles north-east) and Fordell Firs (3 miles north). We also work in nearby towns such as Dunfermline (4 miles north), Kirkcaldy (12 miles north-east), Glenrothes (15 miles north-east), Cowdenbeath (7 miles north), Dysart (13 miles north-east) and Abbeyview (4 miles north).
Near you in North Queensferry
Around North Queensferry, we work in homes near Episcopal Church of St Peter and Queensferry High School. North Queensferry has its own railway station: North Queensferry station. Other landmarks nearby include Queensferry Museum (1.5 miles south) and Inch Garvie (0.8 miles south-east). For a walk, there is Dundas Loch.
What we do, step by step
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we’re done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Mention if the room is upstairs or in a flat
- Ensure the room can be ventilated
- Mention any parking restrictions or tricky access
Ask for a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Have chips seen to early
- A dripping tap should be fixed promptly
- Store bottles off the bath
- Clean with a soft cloth and mild detergent
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
FAQs for North Queensferry
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Which areas do you work in?
Everywhere in the UK, North Queensferry included. Travel is included in the price.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Also near North Queensferry
More services for North Queensferry
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job, from your pictures. The main factors are:
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- What the surface is made of
- How hard the colour is to match
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before you book.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- Where you are, by postcode
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
