Devon · England

Bath Re-enamelling in North Tawton

Damaged bath in North Tawton? We put it right where it is, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • A dull, rough surface that won’t come clean
  • Brown or grey marks that don’t clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in North Tawton

About our bath re-enamelling in North Tawton

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include thin, worn enamel in places and a dull, rough surface that won’t come clean, across basins & shower trays, acrylic baths and Victorian roll-tops.

All our work comes with our one-year guarantee.

Surface Doctor technician refinishing the outside of a roll-top bath
Location
North Tawton (EX20)
Area hub
Devon
Guarantee
One year on every repair
Quote
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026

Do you need bath re-enamelling in North Tawton?

Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.

The things customers typically mention when they call are:

  • A period or roll-top bath worth keeping
  • Thin, worn enamel in places
  • Staining under the taps and around the waste
  • Several chips and rust patches

What your quote should include

  • Aftercare advice
  • Who turns up on the day
  • What the guarantee covers, and for how long
  • How long it needs to cure

How to compare quotes

Keeping it looking good

Simple care helps the repair last. We recommend:

  • Respect the curing time we give you
  • Avoid suction-cup mats
  • Fix dripping taps quickly
  • Do not let dyes or oils sit on the finish

Use mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.

If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.

DIY kit or professional repair?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Why repair rather than replace?

Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the entire surface with the bath left where it is. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Why book with us

  • Straight answers about what a repair can do
  • Every repair guaranteed for a year
  • Everything repaired in place
  • We leave the room as we found it

See our pricing or resurfacing vs replacement cost guide.

FAQs for North Tawton

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Devon.

Does re-enamelling smell?

Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.

How long will the bath be out of use?

Typically one day, with the bath ready the next day. A badly pitted bath can need a second day.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

How soon can you come?

We will give you dates with your quote. Tell us if you need it done quickly.

Do I have to be there?

Someone needs to let us in and show us the job. You don’t need to watch us work.

What does bath re-enamelling cost?

Resurfacing from £350. We give a fixed price from your pictures. Send a close-up and a photo of the whole item with your EX20 postcode.

Will the bath be moved?

No. We resurface it in place, so the tiles and taps stay put.

When we’d advise against a repair

Not everything can be repaired, and we will tell you before we start. Repairs will not solve:

  • A metal bath with a through crack
  • An acrylic bath that flexes badly underfoot
  • Anything hidden under an old coating, until we remove it

If in doubt, send photos and we will say what we think.

Materials we repair

  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays
  • Cast iron baths

Covering North Tawton

North Tawton is about 17 miles west of Exeter, in Devon. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our technicians cover all 586 towns and villages across Devon, from the larger towns to small villages.

Here we cover the EX20 postcode area. Jobs here include addresses on The Square, Market Street and High Street. If you’re just outside North Tawton, we cover Itton (2 miles south-east), Bondleigh (2 miles north-west), Sampford Courtenay (2 miles west), Sampford Chapple (2 miles west) and Belstone Corner (3 miles south-west). Further out, we also cover Okehampton (6 miles south-west), Crediton (11 miles east), South Molton (15 miles north), Great Torrington (15 miles north-west), Hatherleigh (8 miles west) and Winkleigh (4 miles north-west).

Landmarks near North Tawton

Typical jobs here are in homes near North Tawton Community Primary School and Nursery, The Fountain Inn and Church of St Peter and the streets around them. Other landmarks nearby include Millsome Castle (2.6 miles north) and Okehampton Community Hospital (5.9 miles south-west).

Map of North Tawton © OpenStreetMap contributors

For landlords and businesses

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

The process

We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes a full day, and we leave the room as we found it.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Mention if the room is upstairs or in a flat
  • Move bottles, mats and clutter away from the area
  • Keep pets and children out of the room while we work

Getting a price

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and you’re under no obligation.

Get a free quote

Advice

What your bath is made of matters

Cast iron

Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.