Norfolk · England
Bath Re-enamelling in Northacre
Bath re-enamelling in and around Northacre: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
When a repair isn’t the answer
Before you book, it’s worth knowing the limits too:
- Steel that has corroded right through
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
Send us pictures and we’ll tell you honestly.
What we work on
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
About our bath re-enamelling in Northacre
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. We’re often asked to fix chips and rust in more than one place and an outdated colour you’d like to change, on pressed steel baths, acrylic baths and basins & shower trays.
Big or small, you get the same one-year guarantee.
- Location
- Northacre (NR17)
- Area hub
- Norfolk
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Any earlier repairs that need removing first
- How much damage there is
- Where the damage is and how we get to it
- Unusual colours or finishes
A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A picture taken from further back
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- The material, if you know it
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Our work in Northacre
Northacre is about 6 miles north-west of Attleborough, in Norfolk. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Northacre is one of 797 towns and villages in Norfolk where we work.
Here we cover the NR17 postcode area. Other places close to Northacre include Caston (1 mile south-east), Griston (1 mile north-west), Stow Bedon (1 mile south), Thompson (2 miles south-west) and Watton (2 miles north-west). Within a short drive, we also cover Thetford (10 miles south-west), Dereham (9 miles north), Wymondham (10 miles east), Attleborough (6 miles south-east), Hethersett (13 miles east) and Swaffham (10 miles north-west).
Near you in Northacre
Locally, our jobs take us to homes close to Red Lion Public House, Caston Church of England Voluntary Aided Primary School and Church of Holy Cross and the streets around them. Well-known places in the area include Museum 4 Watton (2.7 miles north-west). For a walk, there is Thompson Water and Loch Neaton.
How to care for the repair
A little care keeps the finish looking good. Our advice:
- Have chips seen to early
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
- Rinse off hair dye, oils and bath bombs straight away
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
How it works
You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take most of the day, and you are welcome to carry on with your day while we work.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
Get a quote
Upload photos of the damage and one of the entire item, with your NR17 postcode, and we’ll reply with a fixed price.
Related advice
FAQs for Northacre
Can you quote from photos?
Typically, yes. Clear photos let us give you a fixed price without visiting.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Do you work in Northacre?
We do. We send a technician to Northacre for every job, and the price is the same as everywhere else.
How much does bath re-enamelling cost in Northacre?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
What we are called out for in Northacre
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
You may need us if you’ve spotted any of these:
- A dull, rough surface that won’t come clean
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
What your quote should include
- What happens if the damage is worse than the pictures show
- If travel is included in the price
- Whether the colour is mixed to match
- Aftercare advice
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Why choose Surface Doctor in Northacre
- Straight answers about what a repair can do
- Generally one visit, start to finish
- No extra charge for your area
- One-year guarantee on every repair
Read our full price list and bath cost comparison.
Also near Northacre
Also in Northacre
Landlords, agents and businesses in Northacre
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs in Norfolk and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
