Southampton · England

Bath re-enamelling & resurfacing in Northam, Southampton

Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Northam. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • A coating lifting around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Northam homes

Can I fix it myself?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

Bath re-enamelling in Northam without replacing anything

Most baths are re-enamelled in a day, and you can use the bath the next day. Nothing is disconnected or removed. We work on basins & shower trays, Victorian roll-tops and acrylic baths, and common reasons people contact us are worn patches where water runs and sits and brown or grey marks that don’t clean off.

The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.

Before and after: an old basin refinished to bright white
Where
Northam (SO14, SO19, SO18)
Area hub
Southampton
Guarantee
A year, on every repair
Quotes
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026

Common questions in Northam

Can landlords book you?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

Is there a smell?

Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.

Will the price change on the day?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

Is repairing better than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Which areas do you work in?

We cover the entire UK, including Northam and the rest of Southampton. Just include your postcode and we’ll offer you dates.

How quickly can you book me in?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

How do I get a price for bath re-enamelling in Northam?

Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.

Is my repair covered?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

What affects the price in Northam

Prices start from £350. You will not pay by the hour. The price is based on:

  • Doing more than one item at once
  • The material and finish
  • Previous DIY repairs that have to come out
  • How easy the damage is to reach

There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Send photos for a quote

Most quotes are done from photos alone. To make it quick:

  • Where you are, by postcode
  • Whether it’s been repaired or coated before
  • A coin beside the damage so we can judge size
  • One picture of the whole bath

You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

What happens on the day

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a full day. If we find something your pictures didn’t show, we’ll explain it before carrying on.

  1. We mask and protect the room and ventilate it.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We key the surface and put on a bonding primer.
  4. We spray several coats of new enamel finish.
  5. Once cured, normally by the next day, the bath is ready.

Before we arrive

  • Let us know if it has been repaired before
  • Tell us about parking, stairs or access
  • Plan for the room to be out of bounds to pets and children

Getting a price

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a free quote

Read more

Repair or replace in Northam?

Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.

What you get with us

  • We’ll tell you if it’s not worth repairing
  • A year’s guarantee on all work
  • Technicians who travel to you, UK-wide
  • CHAS, Constructionline and SafeContractor accredited

Read our pricing or resurfacing vs replacement cost guide.

What a repair cannot fix

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Steel that has corroded right through
  • A poorly supported acrylic bath, until it’s firmed up
  • Damage hidden under a previous coating, until it’s stripped back

Send us pictures and we will tell you honestly before booking.

Surfaces we repair

  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths

Covering Northam

Northam is about 1 mile south-east of Southampton, in Southampton. Wherever you are in the SO14 postcode area, a technician comes to you. Northam is one of 40 towns and villages in Southampton where we work. You can also see our page for London, about 69 miles away.

Our visits in SO14, SO19 and SO18 work the same way as everywhere else we cover. Local streets include Sea Road, Lumpy Lane and Cross Road, all of which we cover. Neighbouring places we cover include Peartree Green (1 mile south), Bitterne Manor (1 mile north), Itchen (1 mile south-east), St Mary's (1 mile south-west) and Bitterne (1 mile east). Larger places within reach include Regents Park (3 miles west), Maybush (3 miles north-west), Coxford (3 miles north-west), Lordswood (3 miles north-west), Eling (5 miles west) and Rownhams (4 miles north-west).

What’s near Northam

Locally, our jobs take us to homes close to Bitterne Manor Primary School, Church of St Augustine and East Park. Also close by are The Engineers Arms (less than half a mile west), Inspire Enterprise Academy (0.8 miles south-west) and St Mary's Independent School (0.8 miles north-east). The closest station to Northam is Bitterne station, roughly 0.6 miles north of the centre. A little further out are Bitterne Local History Society Heritage And Research Centre (0.8 miles east) and Marlands Shopping Centre (1.2 miles west). For a walk, there’s Netley Common.

Map of Northam © OpenStreetMap contributors

Landlords, agents and businesses in Northam

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Common problems we fix in Northam

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.

People normally call us when they notice something like this:

  • A roll-top that is seen better days
  • Several chips and rust patches
  • A bath that stays dull however much you clean it
  • Staining under the taps and around the waste

Comparing quotes

  • How to look after the finish
  • Who will actually do the work
  • Whether they match the colour on site
  • What the guarantee covers, and for how long

How to compare quotes

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Don’t leave a chip unrepaired
  • Wash away dyes and oils after use
  • Fix dripping taps quickly
  • Wipe the bath dry after use in hard water areas

Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.

Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.