West Sussex · England
Bath re-enamelling & resurfacing in Norton, West Sussex
Our technicians come to Norton for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Lots of chips and rust spots
- An old resurfacing that is failing
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
How we handle bath re-enamelling in Norton
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We work on Victorian roll-tops, cast iron baths and basins & shower trays, and people most frequently call us about several chips and rust patches and staining under the taps and around the waste.
Every repair is covered by a one-year guarantee, wherever you are in West Sussex.
- Location
- Norton (PO20)
- Region
- West Sussex
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Norton
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- Any earlier repairs that need removing first
- The colour and finish to match
- How easy the damage is to reach
- The size and number of damaged areas
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what helps:
- Where you are, by postcode
- One picture of the whole bath
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll say right away whether it can be repaired.
Nearby places to Norton
Other services in Norton
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Use washing-up liquid and a soft cloth
- Have chips seen to early
- Wipe the bath dry after use in hard water areas
- Never use suction bath mats
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
About Norton
Norton is about 4 miles north of Bognor Regis, in West Sussex. Across the PO20 area, a technician comes to you. Norton is one of 371 places in West Sussex where we work. We work right across the region, from Norton to London (52 miles away).
Our visits in PO20 are booked in the same way as anywhere else. Nearby, we also work in Crockerhill (1 mile north-west), East Hampnett (1 mile west), Nyton (1 mile south-east), Aldingbourne (1 mile south) and Westergate (1 mile south-east). Within a short drive, we also cover Worthing (12 miles east), Bognor Regis (4 miles south), Chichester (4 miles west), Selsey (9 miles south-west), Littlehampton (7 miles east) and Emsworth (11 miles west).
Landmarks near Norton
Locally, our jobs take us to homes close to The Winterton Arms Public House, Ormiston Six Villages Academy and The Parish Church of St Mary. The nearest railway station is Barnham station, about 2.3 miles south-east of the centre. Further afield, we also cover the area around St Richard's Hospital (3.9 miles west) and Tote Copse Castle (1.1 miles south).
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in West Sussex and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Signs you need bath re-enamelling in Norton
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
These are the problems we are asked about most:
- A coloured bath you want in white
- Chips and rust in more than one place
- Thin, worn enamel in places
- An old resurfacing that is failing
What your quote should include
- If travel is included in the price
- Whether cleaning and preparation are in the price
- What happens if the damage is worse than the photos show
- What protection goes down before work starts
Your questions about bath re-enamelling in Norton
Is a repair better than a new one?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can I add another job to the visit?
Of course, and it generally saves money. Just add the extra items to your photos and you will get one combined price.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
How long will the bath be out of use?
One day for most baths, ready the day after. We’ll confirm timings when we quote.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How much does bath re-enamelling cost in Norton?
Prices start from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Mention any earlier repairs or resurfacing
- Make sure the room can be ventilated
- Tell us if there are stairs or a lift
Ask for a price
Upload photos of the damage and a wider shot of the entire item, and tell us you’re in Norton, and we’ll come back with a fixed quote.
Related advice
Repairing versus replacing in Norton
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Work done at your home or business
- Colour mixed on the day to match
- No need to remove anything
- No extra charge for your area
Take a look at our pricing or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
