Somerset · England
Bath Re-enamelling in Oakhill
Bath re-enamelling across Oakhill and nearby, done in a single visit in most cases.
- Resurfacing from £350
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Unusual colours or finishes
- What kind of damage it is
- Any earlier repairs that need removing first
- How many items we do on one visit
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- Details of any past repairs
- What it’s made of, if you know
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll say immediately whether it can be repaired.
About our bath re-enamelling in Oakhill
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. We’re frequently asked to fix a bath in a colour that no longer suits and a dull, rough surface that won’t come clean, in Victorian roll-tops, basins & shower trays and cast iron baths.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Oakhill (BA3)
- Area hub
- Somerset
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Keeping it looking good
It’s all simple stuff:
- Store bottles off the bath
- Fix dripping taps quickly
- Don’t use the bath until it has fully cured
- Use washing-up liquid and a soft cloth
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
How the visit works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for most of the day from start to finish. Before leaving, we tell you how long to leave it and how to care for it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Tell us about parking, stairs or access
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Repair or replace in Oakhill?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
- Generally one visit, start to finish
- Rooms protected and left tidy
Take a look at our full price list or resurfacing vs replacement cost guide.
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A cast iron or steel bath that’s cracked right through
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Landlord and trade work in Oakhill
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams in Somerset and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Our work in Oakhill
Oakhill is about 5 miles south-west of Midsomer Norton, in Somerset. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Oakhill is one of 640 towns and villages in Somerset where we work.
Every address in BA3 is covered. From High Street, Old Brewery Place and Zion Hill or a nearby road, a technician can come to you. Neighbouring places we cover include Ashwick (1 mile north-east), Gurney Slade (1 mile north), Benter (1 mile north-east), Binegar (2 miles north-west) and Thrupe (2 miles south-west). We also work in nearby towns such as Frome (9 miles east), Wells (6 miles west), Midsomer Norton (5 miles north-east), Shepton Mallet (3 miles south), Street (12 miles south-west) and Glastonbury (10 miles south-west).
Around Oakhill
Locally, our jobs take us to homes close to Former United Reformed Church, Oakhill Church School and The Oakhill Inn. Further afield, we also cover the area around Mendip Hospital (3.9 miles west) and Oakhill Manor Museum (within half a mile north-east). Green spaces nearby include Pen Hill and Lechmere Water.
Places near Oakhill
What else we do in Oakhill
Common problems we fix in Oakhill
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Send us a picture if you notice any of these:
- An old resurfacing that’s failing
- Chips and rust in more than one place
- Wear marks under the taps
- Stains that won’t shift
What to look for in a quote
- Whether they match the colour on site
- Whether the price covers travel
- The length of the guarantee and what it covers
- How long it needs to cure
Oakhill: your questions answered
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you work in Oakhill?
Yes. We cover the whole UK and come to Oakhill. Send photos and we’ll quote, or call 0345 017 0787.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we will ask for another angle.
Will there be a smell?
Expect a mild smell while we are working.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Somerset.
About our accreditations · Every repair comes with a one-year guarantee.
