Somerset · England
Bath Re-enamelling in Gurney Slade
Bath re-enamelling in Gurney Slade without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- Wear marks under the taps
- A bath in a colour that no longer suits
Bath re-enamelling in Gurney Slade, done in place
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We regularly repair Victorian roll-tops, cast iron baths and basins & shower trays, and common reasons people get in touch are enamel that’s lost its shine and feels rough and a bath in a colour that no longer suits.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Gurney Slade (BA3)
- Region
- Somerset
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
We work cleanly and quietly. We protect the area first, then the job itself takes the best part of a day. At the end we talk you through how soon it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the day after.
Before we arrive
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
Get a quote
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Related advice
Repairing versus replacing in Gurney Slade
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the following day. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Gurney Slade. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- Same prices wherever you are
- CHAS and Constructionline accredited
- Everything repaired in place
- Colour-matched on site
Read our pricing or guide to resurfacing and replacement costs.
What bath re-enamelling costs
Resurfacing from £350. There’s no charge for travel to Gurney Slade. The price depends on:
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- How easy the damage is to reach
- The colour and finish to match
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from photos
You can take the pictures on your phone, there’s no need for anything special. Just ensure we can see:
- One picture of the entire bath
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- Details of any past repairs
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Places near Gurney Slade
Other services in Gurney Slade
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Where we work around Gurney Slade
Gurney Slade is about 4 miles south-west of Midsomer Norton, in Somerset. From the centre of Gurney Slade to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 640 towns and villages in Somerset, from the larger towns to small villages.
Jobs in BA3 are booked in the same way as anywhere else. That includes homes on Tape Lane, Grunter's Lane and Binegar Lane and the roads around them. If you are just outside Gurney Slade, we cover Binegar (1 mile west), Ashwick (1 mile south-east), Benter (1 mile east), Oakhill (1 mile south) and Emborough (2 miles north-west). Within a short drive, we also cover Frome (9 miles east), Wells (5 miles south-west), Midsomer Norton (4 miles north-east), Shepton Mallet (4 miles south), Street (12 miles south-west) and Glastonbury (10 miles south-west).
Around Gurney Slade
In Gurney Slade, that means homes near George Inn and Church of the Holy Trinity, among other places. Other landmarks nearby include Mendip Hospital (3.8 miles south-west) and Oakhill Manor Museum (1.3 miles south-east). For a walk, there’s Lechmere Water and Pen Hill.
When we’d advise against a repair
In fairness, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Gurney Slade
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Clean with a soft cloth and mild detergent
- Fix dripping taps quickly
- Don’t use the bath until it has fully cured
- Keep suction mats out of the bath
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
When to call us in Gurney Slade
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is usually as strong as ever.
You may need us if you’ve spotted any of these:
- Stains that will not shift
- Wear marks under the taps
- A period or roll-top bath worth keeping
- A dull, rough surface that won’t come clean
Before you book anyone
- How soon you can use it again
- Whether they match the colour on site
- Whether the price covers travel
- What aftercare is recommended
Gurney Slade questions
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Which areas do you work in?
All of Somerset, and the rest of the UK. There is no extra charge for travel.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
How much does bath re-enamelling cost in Gurney Slade?
Prices start from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item with your BA3 postcode.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
About our accreditations · Every repair comes with a one-year guarantee.
