Middlesbrough · England
Bath re-enamelling & resurfacing in Ormesby, Middlesbrough
Bath re-enamelling across Ormesby and nearby, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A dull, rough surface that won’t come clean
About our bath re-enamelling in Ormesby
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. If you are dealing with an old resurfacing that’s failing and lots of chips and rust spots, we can help.
Big or small, you get the same one-year guarantee.
- Where
- Ormesby (TS3, TS7)
- Region
- Middlesbrough
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we can’t put right
Before booking, it’s worth knowing the limits too:
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Do you need bath re-enamelling in Ormesby?
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
These are the problems we are asked about most:
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
Comparing quotes
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
- How your room will be protected
- How changes to the job are handled
Prices and what affects them
Resurfacing from £350. There is no area surcharge for Ormesby. The price reflects:
- Access to the area
- How much damage there is
- How hard the colour is to match
- The type of damage
Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- Details of any past repairs
- Something in shot to show the size
Most customers in Ormesby get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Keeping it looking good
Once the work has cured, treat it gently:
- Do not let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
Dry the bath after use if possible, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Ormesby and nearby
Ormesby is about 1 mile south-west of Eston, in Middlesbrough. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Ormesby is one of 33 towns and villages in Middlesbrough where we work. We work right across the region, from Ormesby to Newcastle upon Tyne (35 miles away).
Jobs in TS3 and TS7 work the same way as everywhere else we cover. From Dew Lane, Lilac Road and Tebay Road or anywhere nearby, we can come to you. Ormesby sits on or near the A171, so getting to you is simple. Neighbouring places we cover include Netherfields (1 mile north), Park End (1 mile west), Normanby (1 mile north-east), Thorntree (1 mile north) and Eston (1 mile north-east). We also work in nearby towns such as Brookfield (3 miles west), Newtown (6 miles west), Oxbridge (6 miles west), Ayresome (3 miles west), Tilery (5 miles west) and Acklam (3 miles west).
Near you in Ormesby
Locally, our jobs take us to homes close to Church of St Cuthbert, Outwood Academy Ormesby and Ormesby Primary School, among other places. For rail, the closest station is Marton station, about 0.8 miles south-west. Well-known places in the area include Cleveland (1.7 miles south) and Cleveland Centre (2.8 miles north-west). The countryside around Ormesby includes Eston Nab and RSPB Salthome.
Your questions about bath re-enamelling in Ormesby
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
How do I get a price for bath re-enamelling in Ormesby?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can you quote from photos?
Generally, yes. Clear pictures let us give you a fixed quote without visiting.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
What happens if you find more damage?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
Do you cover Ormesby?
We do. We send a technician to Ormesby for every job, and the price is the same as everywhere else.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- We come to you, anywhere in the UK
- A year’s guarantee on all work
- Free fixed quotes from pictures
- No need to remove anything
Take a look at our prices page and guide to resurfacing and replacement costs.
What else we do in Ormesby
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
The process
The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
Get a quote
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll say immediately whether it can be repaired.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
