Middlesbrough · England
Bath re-enamelling & resurfacing in Netherfields, Middlesbrough
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Netherfields. Free, fixed quotes from your photos.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
Questions from Netherfields
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you price it without visiting?
Nearly always. If photos do not show enough, we’ll ask for another angle.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we’ll quote them together.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Bath re-enamelling in Netherfields, done in place
We do not move the bath, so your taps, tiles and plumbing are left alone. It normally takes one visit, and can be used again the next day. Whether it’s enamel that’s lost its shine and feels rough and several chips and rust patches, we can help.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Netherfields (TS3, TS7, TS6)
- County
- Middlesbrough
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
How it works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the next day.
How to prepare
- Tell us if there are stairs or a lift
- Make sure the area is dry
- Keep pets and children out of the room while we work
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.
Advice
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
- Wash away dyes and oils after use
- Repair dripping taps early
Use mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
When to call us in Netherfields
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Typical reasons for a call-out include:
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
- A peeling or bubbling previous coating
Before you book anyone
- Who turns up on the day
- What happens if the damage is worse than the photos show
- How the room is protected while they work
- A fixed price, and whether VAT is included
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
When we’d advise against a repair
In fairness, there are a few things a repair will not fix:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Netherfields
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why Netherfields customers choose us
- Every repair guaranteed for a year
- Typically one visit, start to finish
- Colour mixed on the day to match
- Rooms protected and left tidy
Take a look at our pricing or guide to resurfacing and replacement costs.
Our work in Netherfields
Netherfields is about 1 mile west of Eston, in Middlesbrough. Across the TS3 area, a technician comes to you. Netherfields is one of 33 towns and villages in Middlesbrough where we work. Our jobs stretch from Netherfields to Newcastle upon Tyne (about 35 miles away).
Our visits in TS3, TS7 and TS6 are booked in the same way as anywhere else. Local streets include Tebay Road, Scott Road and High Street, and we cover them all. Being close to the A171, Netherfields is simple for us to get to. We also cover the places around Netherfields: Ormesby (1 mile south), Park End (1 mile west), Thorntree (1 mile north), Normanby (1 mile east) and Eston (1 mile east). We also work in nearby towns such as Brookfield (3 miles south-west), Newtown (6 miles west), Oxbridge (6 miles west), Ayresome (3 miles west), Tilery (5 miles west) and Acklam (4 miles west).
Landmarks near Netherfields
Around Netherfields, we work in homes near Church of St Cuthbert, Pennyman Primary Academy and Stewart Park and the streets around them. The closest station to Netherfields is Marton station, roughly 1.1 miles south-west. Other landmarks nearby include St Luke's Hospital (1.4 miles west) and Newham Grange Farm Museum (2.4 miles south-west). For a walk, there’s Eston Nab and RSPB Salthome.
- Other local spots include Cleveland (2.1 miles south)
Other services in Netherfields
About our accreditations · Every repair comes with a one-year guarantee.
