Wolverhampton · England
Bath re-enamelling & resurfacing in Orton, Wolverhampton
Bath re-enamelling across Orton and nearby, generally in one visit.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Wear marks under the taps
What happens on the day
We work cleanly and quietly. Protection goes down first, then the job itself takes most of the day. At the end we talk you through how soon it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Make sure the room can be ventilated
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
How we handle bath re-enamelling in Orton
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s chips and rust in more than one place and an old resurfacing that’s failing, we can help, whatever the material.
All our work is covered by a one-year guarantee.
- Location
- Orton (WV4)
- County
- Wolverhampton
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:
- How much damage there is
- Whether we combine several jobs
- Any earlier repairs that need removing first
- How hard the colour is to match
Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- A wider photo showing the whole bath
- Good light, ideally daylight, without flash glare
- The material, if you know it
- Your postcode, so we can check dates
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Repair or replace in Orton?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Fixed prices from your pictures
- Work done at your home or business
- One visit for most repairs
- Nothing taken out or refitted
Read our pricing or bath cost comparison.
About Orton
Orton is about 3 miles north-west of Sedgley, in Wolverhampton. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. We cover all 96 towns and villages across Wolverhampton, from the larger towns to small villages. Our nearest city page is Birmingham, about 14 miles away.
Our technicians cover all of WV4. Local streets include Orton Lane and Flash Lane, and we cover them all. Close by, we cover Lower Penn (1 mile north), Bratch (1 mile south), Warstones (1 mile north-east), Merry Hill (1 mile north-east) and Castlecroft (2 miles north). Larger places within reach include Wolverhampton (4 miles north-east), Bilston (5 miles east), Coseley (4 miles east), Wednesfield (6 miles north-east), New Invention (8 miles north-east) and Gornal (4 miles south-east).
Landmarks near Orton
Typical jobs here are in homes near St Anne, Highfields School and Springdale Primary School, among other places. For rail, the closest station is Wolverhampton station, about 3.8 miles north-east of the centre. Well-known places in the area include Mander Centre (3.5 miles north-east) and Wolverhampton and Midland Counties Eye Infirmary (3 miles north-east). For a walk, there’s Beacon Hill.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Signs you need bath re-enamelling in Orton
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Look out for these signs:
- An old resurfacing that is failing
- An original cast iron bath that needs restoring
- Wear marks under the taps
- Brown or grey marks that don’t clean off
What your quote should include
- How changes to the job are handled
- How the colour is matched
- How soon you can use it again
- How the room is protected while they work
FAQs for Orton
Can you do the outside of a roll-top?
Yes. Inside and out.
Can you quote from pictures?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
What happens after I send pictures?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Nearby places to Orton
More services for Orton
When we would advise against a repair
To be straight with you, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Looking after it afterwards
So the finish stays in good condition for years:
- Wash away dyes and oils after use
- Keep suction mats out of the bath
- Use washing-up liquid and a soft cloth
- Leave the bath for the full curing time before using it
Dry the bath after use if possible, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
