Leeds · England
Bath re-enamelling & resurfacing in Otley, Leeds
Full bath re-enamelling and resurfacing for homes and businesses in Otley and across Leeds. Free, fixed quotes from your photos.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
When to call us in Otley
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Get in touch if you’ve noticed any of these:
- Staining under the taps and around the waste
- Wear marks under the taps
- An outdated colour you’d like to change
- An old resurfacing that’s failing
Questions to ask before booking
- The length of the guarantee and what it covers
- What prep work is covered
- If travel is included in the price
- How the room is protected while they work
Bath re-enamelling in Otley, done in place
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Common call-outs are for brown or grey marks that don’t clean off and thin, worn enamel in places, in cast iron baths, Victorian roll-tops and acrylic baths.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Otley (LS21)
- County
- Leeds
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Otley
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.
Which areas do you work in?
Everywhere in the UK, Otley included. There’s no extra charge for travel.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we’ll plan for it.
Landlords, agents and businesses in Otley
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Our work in Otley
Otley is about 7 miles north of Pudsey, in Leeds. Our repair technicians come to clients in Otley, so there is no workshop to go to. We work in all 198 towns and villages across Leeds, from the larger towns to small villages. You can also see our page for Leeds, about 9 miles away.
Every address in LS21 is covered, from the main roads to the quietest streets. Streets in the area include Manor Square, Market Place and Market Street, and we cover them all. Otley sits on or near the A659 and A660, so getting to you is simple. Neighbouring places we cover include Newall (1 mile north), Knotford (1 mile east), Farnley (2 miles north-east), Leathley (2 miles north-east) and Lindley (3 miles north-east). Within a short drive, we also cover Leeds (9 miles south-east), Morley (12 miles south), Pudsey (7 miles south), Rothwell (14 miles south-east), Beeston (11 miles south-east) and Farsley (7 miles south).
Near you in Otley
In Otley, that means homes near Bay Horse Public House, St Joseph's Catholic Primary School and Beech Hill Church. Otley’s nearest station is Menston station, about 1.9 miles south-west of the centre. Well-known places in the area include Wharfedale Hospital (0.6 miles north-west). Open spaces near Otley include Yeadon Tarn and The Chevin.
Also in Otley
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Aftercare tips
Looking after the surface is easy:
- Rinse off hair dye, oils and bath bombs immediately
- Don’t use the bath until it has fully cured
- Do not leave bottles, razors or sponges standing on the surface
- Clean with a soft cloth and mild detergent
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Why repair rather than replace?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there is no premium for Otley. The job itself decides the price: the material, the amount of damage and how many items.
Why Otley customers choose us
- We leave the room as we found it
- Fixed prices from your pictures
- One-year guarantee on every repair
- CHAS, Constructionline and SafeContractor accredited
See our prices page or resurfacing vs replacement cost guide.
What affects the price in Otley
Prices start from £350. We don’t charge extra for travel to Otley. The price depends on:
- Access to the area
- How many areas need work
- Unusual colours or finishes
- Whether we combine several jobs
We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what helps:
- A photo taken from further back
- A coin or ruler next to the damage for scale
- Any details about the material
- Details of any past repairs
To get a price, send two or three pictures using our quote form or ring us. We will say immediately whether it can be repaired.
The process
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take a full day, and you can get on with other things while we are there.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
Get a quote
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
