Hampshire · England
Bath Re-enamelling for Ower homes
Bath re-enamelling for Ower, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Stains that won’t shift
- A bath that stays dull however much you clean it
Bath re-enamelling in Ower without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. We are often asked to fix a peeling or bubbling previous coating and lots of chips and rust spots, across cast iron baths, basins & shower trays and Victorian roll-tops.
Big or small, you get the same one-year guarantee in Ower and across Hampshire.
- Location
- Ower (SO51)
- Area hub
- Hampshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we are called out for in Ower
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
You may need us if you’ve spotted any of these:
- An outdated colour you’d like to change
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
Comparing quotes
- Whether there are any call-out or travel charges
- What happens if they find more damage
- How soon you can use it again
- What aftercare is recommended
FAQs for Ower
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help.
Do you cover the whole of Hampshire?
We work UK-wide. Prices do not change with location.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Ower as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For anyone letting property in or around Ower, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
Nearby places to Ower
Also in Ower
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Any earlier repairs that need removing first
- How many items we do on one visit
- Where the damage is and how we get to it
- The colour and finish to match
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed quote
Most quotes are done from photos alone. To make it quick:
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- One picture of the whole bath
- Details of any past repairs
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Get any chip repaired quickly
- Rinse off hair dye, oils and bath bombs immediately
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Where we work around Ower
Ower is about 2 miles north-west of Totton, in Hampshire. Anywhere in SO51, we carry out the work at your property. Ower is one of 683 towns and villages in Hampshire we cover. Our jobs stretch from Ower to London (73 miles away).
Jobs in SO51 are booked in the same way as anywhere else. From Romsey Road and Salisbury Road or a nearby road, we can come to you. We also travel to Wigley (1 mile north), Hillstreet (1 mile east), Copythorne (1 mile south-west), Winsor (1 mile south-west) and Newbridge (2 miles west). Further out, we also cover Winchester (12 miles north-east), Eastleigh (8 miles east), Chandler's Ford (7 miles north-east), Hedge End (10 miles east), Lymington (13 miles south) and Romsey (4 miles north-east).
Landmarks near Ower
The nearest railway station is Totton station, about 3 miles south-east of the centre. Well-known places in the area include Tatchbury Mount Hospital (1.1 miles south) and Eling Experience (2.8 miles south-east). Not far away are Copythorne Common.
- Parks and local facilities nearby include Romsey Extra (2.7 miles north-east)
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
How the visit works
We agree an arrival time beforehand. On site, it takes most of the day for most jobs. The room is left tidy and you’ll know when it can be used.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
- Point us to the nearest place to park
Getting a price
Email us photos of the damage and a wider shot of the entire item, with your SO51 postcode, and we will reply with a fixed quote.
Advice
When we would advise against a repair
Before you book, it’s worth knowing the limits:
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
