Hampshire · England
Bath re-enamelling & resurfacing in Winsor, Hampshire
Fixed-price bath re-enamelling in Winsor and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Lots of chips and rust spots
How we handle bath re-enamelling in Winsor
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the day after. Common call-outs are for a bath in a colour that no longer suits and thin, worn enamel in places, across cast iron baths, Victorian roll-tops and acrylic baths.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Area
- Winsor (SO40)
- County
- Hampshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Nearby places to Winsor
What else we do in Winsor
Landlords, agents and businesses in Winsor
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams in Hampshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Common problems we fix in Winsor
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Send us a photo if you notice any of these:
- A peeling or bubbling previous coating
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
Questions to ask before booking
- How long it needs to cure
- Whether there are any call-out or travel charges
- Whether cleaning and preparation are in the price
- What protection goes down before work starts
Why repair rather than replace?
A replacement frequently means several trades over several days. Re-enamelling is one technician, generally one day, with the bath back in use the next day. Prices start from £350. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why choose Surface Doctor in Winsor
- Dust sheets down, tidy finish
- Repair technicians who travel to you, UK-wide
- Colour mixed on the day to match
- Everything repaired in place
See our full price list or guide to resurfacing and replacement costs.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
- Store bottles off the bath
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What happens on the day
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We tidy up before we leave and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Let us know which floor the room is on
- Make sure the room can be ventilated
- Point us to the nearest place to park
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Advice
Winsor and the surrounding area
Winsor is about 2 miles west of Totton, in Hampshire. Anywhere in SO40, we come to you. We cover all 683 towns and villages across Hampshire, from the larger towns to small villages. Our jobs stretch from Winsor to London (about 74 miles away).
We cover every part of SO40. Local streets include Winsor Road, Winsor Lane and Pound Lane, all of which we cover. We also travel to Copythorne (1 mile north-west), Bartley (1 mile south-west), Netley Marsh (1 mile south-east), Cadnam (1 mile west) and Newbridge (1 mile north-west). Within a short drive, we also cover Winchester (14 miles north-east), Eastleigh (9 miles east), Chandler's Ford (8 miles north-east), Hedge End (11 miles east), Lymington (12 miles south) and Romsey (6 miles north-east).
Landmarks near Winsor
Our clients here include homes close to Church of St Mary, Copythorne CofE Infant School and Compass Inn and the streets around them. The closest station to Winsor is Ashurst New Forest station, roughly 2.7 miles south-east. Further afield, we also cover the area around Tatchbury Mount Hospital (1 mile east) and Eling Experience (2.7 miles east). Green spaces nearby include Copythorne Common.
Questions from Winsor
Can you do the outside of a roll-top?
Yes. Inside and out.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Winsor.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there a guarantee?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Holes rusted through the metal
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
Send us photos and we’ll tell you honestly.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
