County Durham · England

Bath re-enamelling & resurfacing in Oxhill, County Durham

Bath re-enamelling across Oxhill and nearby, generally in one visit and guaranteed for a year.

  • Resurfacing from £350
  • Staining under the taps and around the waste
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Oxhill

How we price bath re-enamelling

Prices start from £350. A fixed quote means you know the cost before booking. We take into account:

  • Access to the area
  • The colour and finish to match
  • What kind of damage it is
  • The material

What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.

How to get a fixed price

The better the photos, the more accurate the price. Here’s what helps:

  • A wider photo showing the whole bath
  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size
  • One sharp close-up of the damage

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

About our bath re-enamelling in Oxhill

Re-enamelling is a one-day job for most baths, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. Whether it’s a peeling or bubbling previous coating and chips and rust in more than one place, we can help, on acrylic baths, basins & shower trays and Victorian roll-tops alike.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Basin with yellowed glaze resurfaced to a clean white finish
Location
Oxhill (DH9)
County
County Durham
Warranty
12 months on all our work
Price
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026

What we do, step by step

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow the best part of a day. Before leaving, we tell you when it can be used and how to look after it.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Before we arrive

  • Open a window if you can
  • Keep pets and children out of the room while we work
  • Mention any parking restrictions or tricky access

How to get a price

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.

Send photos for a quote

Related advice

Do you need bath re-enamelling in Oxhill?

In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.

Keep an eye out for these signs:

  • A bath in a colour that no longer suits
  • A bath that stays dull however much you clean it
  • Thin, worn enamel in places
  • Several chips and rust patches

Comparing quotes

  • What preparation is included
  • Is the price fixed, and does it include VAT?
  • How the room is protected while they work
  • How soon you can use it again

10 questions to ask before you book

Repairing versus replacing in Oxhill

Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Prices start from £350. The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.

Why choose Surface Doctor in Oxhill

  • Rooms protected and left tidy
  • Generally one visit, start to finish
  • No extra charge for your area
  • Everything repaired in place

Read our full price list or resurfacing vs replacement cost guide.

Our work in Oxhill

Oxhill is about 1 mile west of Stanley, in County Durham. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. Oxhill is one of 329 places in County Durham where we work. You can also see our page for Newcastle upon Tyne, about 9 miles away.

We work across the DH9 postcode area. From Pea Road, Park Road and Tyne Road or anywhere nearby, we can come to you. Close by, we cover South Moor (1 mile south), New Kyo (1 mile south-west), Shield Row (1 mile north), East Kyo (1 mile west) and Tanfield Lea (1 mile north). Further out, we also cover Durham (8 miles south-east), Consett (5 miles west), Bishop Auckland (15 miles south), Spennymoor (12 miles south), Seaham (15 miles east) and Chester-le-Street (5 miles east).

Around Oxhill

Our clients here include homes close to South Stanley Infant and Nursery School, Roman Catholic Church of St Joseph and North Durham Academy and the streets around them. Other local landmarks include Imperial Hotel (within half a mile north-east) and Tanfield School (0.7 miles north). Further afield, we also cover the area around Chester Le Street Hospital (5.4 miles east) and Derwentside (2.1 miles west).

Map of Oxhill © OpenStreetMap contributors

What a repair cannot fix

We would rather lose a job than do one that won’t last, so these are the limits:

  • Plumbing leaks, which need a plumber
  • Problems we cannot see until an old finish comes off
  • Holes rusted through the metal

Not sure? Send photos and we’ll give you a straight answer.

Materials we work on in Oxhill

  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
  • Basins & shower trays

Oxhill: your questions answered

How long does re-enamelling take?

Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.

Can tenants book a repair?

Of course. Ask your landlord first, and we can send them the quote if that helps.

What happens if you find more damage?

Your quote covers the damage in the pictures. Anything extra is discussed before we begin.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

How much does bath re-enamelling cost in Oxhill?

Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.

Do you work in Oxhill?

Yes. We cover the whole UK and come to Oxhill and the rest of County Durham. Send us pictures for a fixed quote, or call 0345 017 0787.

Do you resurface freestanding baths?

Yes. We can do the inside and outside if you’d like.

Landlord and trade work in Oxhill

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Looking after it afterwards

Much of the damage we repair could have been avoided. These habits help:

  • Clean with a soft cloth and mild detergent
  • Do not let dyes or oils sit on the finish
  • Dry the bath after use to stop limescale
  • A dripping tap should be fixed promptly

The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.