Warwickshire · England

Bath Re-enamelling for Packwood homes

Damaged bath in Packwood? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • A bath that stays dull however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Packwood

How we handle bath re-enamelling in Packwood

We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We work on pressed steel baths, acrylic baths and cast iron baths, and people most frequently call us about an old resurfacing that’s failing and a coloured bath you want in white.

We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.

Roll-top bath being refinished by a Surface Doctor technician
Where
Packwood (B94)
Area hub
Warwickshire
Guarantee
12 months on all our work
Price
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026

Prices and what affects them

Prices start from £350. Each job gets its own fixed price. This is what makes a difference:

  • Access to the area
  • What kind of damage it is
  • The size and number of damaged areas
  • Whether old repairs or coatings need taking off

Our prices are the same across the UK, so there is no premium for Packwood. What changes the price is the job itself: the material, the amount of damage and how many items.

How to get a fixed price

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • The material, if you know it
  • One picture of the whole bath
  • Any earlier repairs or coatings
  • Daylight if possible, and no flash reflection

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.

The process

We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and the room is left clean and tidy.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

How to prepare

  • Mention any earlier repairs or resurfacing
  • Open a window if you can
  • Mention any parking restrictions or tricky access

Get a quote

If you are in Packwood and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Get a free quote

Advice

Packwood: your questions answered

What areas do you cover?

All of Warwickshire, and the rest of the UK. There’s no extra charge for travel.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Do you do work for letting agents?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Packwood.

Can you make a coloured bath white?

Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.

Can you repair something that’s been repaired before?

In most cases. We remove the old repair before doing a new one, so let us know about it.

Is repairing better than replacing?

Typically, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

What happens after I send photos?

You will get a fixed quote back, plus dates. There’s no obligation to book.

What information do you need?

Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.

When a repair isn’t the answer

In fairness, some problems need a different fix:

  • An acrylic bath that flexes badly underfoot
  • A metal bath with a through crack
  • Holes rusted through the metal

If in doubt, send photos and we will say what we think before you book.

Surfaces we repair

  • Basins & shower trays
  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths

Repair or replace: which is better?

A replacement frequently means several trades over several days. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.

What you get with us

  • CHAS, Constructionline and SafeContractor accredited
  • One-year guarantee on every repair
  • Colour-matched on site
  • Rooms protected and left tidy

See our full price list and bath cost comparison.

For landlords and businesses

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Landlords, letting agents and housing providers in Packwood use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Looking after it afterwards

Once the work has cured, treat it gently:

  • Respect the curing time we give you
  • Keep toiletries on a shelf rather than in the bath
  • Stick to gentle, non-abrasive cleaners
  • Fix dripping taps quickly

Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.

Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Repairs by material

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.

Covering Packwood

Packwood is about 4 miles south-east of Solihull, in Warwickshire. Anywhere in B94, a technician comes to you. We cover all 324 towns and villages in Warwickshire. Our nearest city page is Birmingham, about 10 miles away.

Jobs in B94 work the same way as everywhere else we cover. From Packwood Road, Windmill Lane and Vicarage Road or anywhere nearby, we can come to you. Close by, we cover Darley Green (1 mile north-east), Packwood Gullet (1 mile north-west), Chessetts Wood (1 mile east), Norton Green (1 mile north) and Dorridge (1 mile north-west). Larger places within reach include Warwick (9 miles south-east), Royal Leamington Spa (10 miles south-east), Stratford-upon-Avon (11 miles south), Bedworth (14 miles north-east), Leamington Spa (10 miles south-east) and Kenilworth (7 miles east).

Local landmarks in Packwood

Around Packwood, we work in homes near Arden, The Railway Inn and Church of St Giles. The nearest railway station is Dorridge station, roughly 1.1 miles north of the centre. Nearby you will also find Baddesley Clinton (1.9 miles south-east) and Catherine-de-Barnes Isolation Hospital (4 miles north). Open spaces near Packwood include Henley Sidings.

Map of Packwood © OpenStreetMap contributors

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.