Hampshire · England
Bath re-enamelling & resurfacing in Pamber End, Hampshire
Damaged bath in Pamber End? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A dull, rough surface that will not come clean
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price is based on:
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- How many items we do on one visit
We charge the same wherever you are, so there’s no premium for Pamber End. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Where you are, by postcode
- Any earlier repairs or coatings
- A wider photo showing the whole bath
- What it’s made of, if you know
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Bath re-enamelling in Pamber End, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s an old resurfacing that’s failing and a dull, rough surface that won’t come clean, we can help, on acrylic baths, basins & shower trays and Victorian roll-tops alike.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Pamber End (RG26)
- Region
- Hampshire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Rinse off hair dye, oils and bath bombs straight away
- A dripping tap should be fixed promptly
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
What happens on the day
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. You can expect it to take most of the day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Have a window or extractor fan available
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
Ask for a price
To get a price, send a couple of photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Related advice
Pamber End: your questions answered
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can I get a quote without a visit?
Generally, yes. Clear photos let us give you a fixed price without visiting.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Can you repair something that’s been repaired before?
Yes, we often do. Removing the old work can add time, and that is in the quote.
About Pamber End
Pamber End is about 2 miles south of Tadley, in Hampshire. Anywhere in RG26, we come to you. We cover 683 places across Hampshire, from the larger towns to small villages. Our nearest city page is London, about 46 miles away.
Our visits in RG26 are booked in the same way as anywhere else. Whether you live on Fields View Close, Aldermaston Road and Bramley Road or anywhere nearby, a technician can come to you. Nearby, we also work in Salters Heath (1 mile south-east), Pamber Green (1 mile north-east), Little London (1 mile north-east), Charter Alley (1 mile south-west) and West Heath (1 mile west). Larger places within reach include Basingstoke (4 miles south), Fleet (13 miles east), Alton (14 miles south-east), Yateley (13 miles east), Hook (8 miles east) and Popley (3 miles south-east).
Near you in Pamber End
Typical jobs here are in homes near Pamber Priory, The Priory Primary School and The Queens College Arms. The nearest railway station is Bramley (Hants) station, roughly 2.8 miles east of the centre. Nearby you will also find Calleva Museum (2.5 miles north-east) and Basing House (4.9 miles south-east). Open spaces near Pamber End include Daneshill Park Woods.
Also near Pamber End
More services for Pamber End
What we cannot put right
Some jobs are not right for a repair, including:
- A bath that’s rusted through
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Common problems we fix in Pamber End
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
You may need us if you’ve spotted any of these:
- A dull, rough surface that will not come clean
- Several chips and rust patches
- Stains that will not shift
- A coloured bath you want in white
Before booking anyone
- Who will actually do the work
- How your room will be protected
- Whether the price is fixed and includes VAT
- How changes to the job are handled
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
