Tameside · England
Bath Re-enamelling in Park Bridge
Full bath re-enamelling and resurfacing in Park Bridge, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- A roll-top that is seen better days
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Bath re-enamelling in Park Bridge, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. It generally takes one visit, and can be used again the following day. Our technicians work on pressed steel baths, basins & shower trays and acrylic baths, and people most often call us about a coating lifting around the plughole and staining under the taps and around the waste.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Park Bridge (OL6)
- County
- Tameside
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Park Bridge
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
If you manage property in Park Bridge, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
When we would advise against a repair
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
If in doubt, send pictures and we will say what we think.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Should you replace it?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- We come to you, anywhere in the UK
- Everything repaired in place
Read our full price list and bath cost comparison.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which generally takes most of the day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
Getting a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
Common problems we fix in Park Bridge
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is usually as strong as ever.
Contact us if you’ve noticed any of these:
- An outdated colour you’d like to change
- A roll-top that is seen better days
- A peeling or bubbling previous coating
- Several chips and rust patches
What to look for in a quote
- Who will actually do the work
- Whether the price covers travel
- How long the guarantee is and what it covers
- When it can be used again
Park Bridge questions
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote with dates.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send photos.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Towns and villages near Park Bridge
More services for Park Bridge
What affects the price in Park Bridge
Prices start from £350. Prices are worked out job by job. The main factors are:
- How many areas need work
- Unusual colours or finishes
- What the surface is made of
- Whether we combine several jobs
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Before you send photos, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- A wider photo showing the entire bath
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Park Bridge and nearby
Park Bridge is about 1 mile south-east of Oldham, in Tameside. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 32 places in Tameside. Our jobs stretch from Park Bridge to Manchester (about 6 miles away).
Every address in OL6 is covered. From Dean Terrace, Mill Brow and Alt Hill Road or anywhere nearby, we can come to you. Nearby, we also work in Alt Hill (1 mile south), Alt (1 mile north-east), Abbey Hills (1 mile north), Top of Lane (1 mile north-east) and Hurst (1 mile south). We also work in nearby towns such as Denton (5 miles south), Hyde (5 miles south), Stalybridge (3 miles south-east), Droylsden (3 miles south-west), Dukinfield (3 miles south) and Audenshaw (4 miles south-west).
Landmarks near Park Bridge
In Park Bridge, that means homes near St Martin's CofE Junior Infant and Nursery School, Werneth Park and Church of the Holy Trinity, among other places. Other local landmarks include Breeze Hill School (1.1 miles north), The Hathershaw College (0.9 miles west) and Black Diamond pub (0.9 miles south-west). The nearest railway station is Ashton-Under-Lyne station, roughly 2 miles south of the centre. A little further out are Ashton Hurst (1 mile south-east) and Tameside General Hospital (2 miles south-east). The countryside around Park Bridge includes Boating lake and Harridge Pike.
About our accreditations · Every repair comes with a one-year guarantee.
