St Helens · England
Bath Re-enamelling for Park Hill homes
Bath re-enamelling across Park Hill and nearby, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- Chips and rust in more than one place
About our bath re-enamelling in Park Hill
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with an original cast iron bath that needs restoring and a coating lifting around the plughole, we can usually put it right.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Where
- Park Hill (WA11)
- County
- St Helens
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Park Hill and the surrounding area
Park Hill is about 2 miles south of Skelmersdale, in St Helens. Wherever you are in the WA11 postcode area, we come to you. Our technicians cover 32 places in St Helens, from the larger towns to small villages. Our jobs stretch from Park Hill to Liverpool (9 miles away).
Our visits in WA11 work the same way as everywhere else we cover. Other places close to Park Hill include Rainford Junction (1 mile east), Rainford (1 mile south-east), Crawford (2 miles east), Kings Moss (2 miles east) and Skelmersdale (2 miles north). Further out, we also cover St Helens (5 miles south-east), Prescot (7 miles south), Newton-le-Willows (8 miles south-east), Haydock (6 miles south-east), Earlestown (8 miles south-east) and Parr (6 miles south-east).
Near you in Park Hill
Typical jobs here are in homes near Rainford Brook Lodge Community Primary School and Rainford High School and the streets around them. Park Hill has its own railway station: Rainford station. Nearby you will also find Billinge Hospital (3.6 miles east). Open spaces near Park Hill include Billinge Hill.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
What affects the price in Park Hill
Prices start from £350. We price every job individually, from your pictures. What matters most is:
- What kind of damage it is
- The material
- Unusual colours or finishes
- How many areas need work
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- One sharp close-up of the damage
- A photo taken from further back
- The postcode, so we can plan the visit
- What it’s made of, if you know
Send us a picture of the damage and a wider shot of the entire item, with your WA11 postcode, and we will reply with a fixed price.
Repair or replace in Park Hill?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
Why Park Hill customers choose us
- CHAS and Constructionline accredited
- Straight answers about what a repair can do
- One price list for the whole UK
- Technicians who travel to you, UK-wide
See our pricing or bath cost comparison.
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
What we’re called out for in Park Hill
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
The most common problems we’re called about are:
- A peeling or bubbling previous coating
- Wear marks under the taps
- A dull, rough surface that will not come clean
- A bath in a colour that no longer suits
What to look for in a quote
- What happens if they find more damage
- Who turns up on the day
- How the colour is matched
- Is the price fixed, and does it include VAT?
How the visit works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes most of the day, and we finish by cleaning up and talking you through the result.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
- Let us know about parking or access
How to get a price
To get a price, send a couple of photos using our quote form or call us. We will say straight away whether it can be repaired.
Advice
Your questions about bath re-enamelling in Park Hill
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Can pets and children be at home?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do you cover the entire of St Helens?
We cover the entire UK, including Park Hill and the rest of St Helens. Send your postcode with your pictures and we’ll offer you dates.
What we can’t put right
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly before you book.
Materials we work on in Park Hill
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Looking after it afterwards
Once the work has cured, treat it gently:
- Clean with a soft cloth and mild detergent
- Leave the bath for the full curing time before using it
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Nearby places to Park Hill
More services for Park Hill
About our accreditations · Every repair comes with a one-year guarantee.
