Lancashire · England
Bath Re-enamelling for Up Holland homes
Our technicians come to Up Holland for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- Lots of chips and rust spots
FAQs for Up Holland
How long will the bath be out of use?
Most baths are done in a day, ready the next day. We’ll confirm timings when we quote.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you’ll get one combined price.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
What happens once I’ve sent photos?
We come back with a fixed quote, plus dates. There is no obligation to book.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Is there a guarantee?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
How much does bath re-enamelling cost in Up Holland?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
About our bath re-enamelling in Up Holland
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with an original cast iron bath that needs restoring and chips and rust in more than one place, we can typically put it right, whatever the material.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Up Holland (WN8)
- Region
- Lancashire
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. It normally takes most of the day, and we’ll keep you posted as we go.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know if it has been repaired before
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Advice
Also near Up Holland
Also in Up Holland
Work for landlords and builders
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Landlords, letting agents and housing providers in Up Holland use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Where we work around Up Holland
Up Holland is about 1 mile west of Orrell, in Lancashire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 482 towns and villages in Lancashire. Our nearest city page is Liverpool, about 12 miles away.
All of WN8 is within our area. From Highgate Road, Stanley Road and The Dell or anywhere nearby, a technician can come to you. Close by, we cover Orrell (1 mile east), Roby Mill (1 mile north), Walthew Green (1 mile north), Higher End (1 mile south-east) and Crawford (2 miles south-west). Within a short drive, we also cover Chorley (9 miles north-east), Bamber Bridge (13 miles north), Leyland (11 miles north), Ormskirk (7 miles west), Penwortham (14 miles north) and Ashton-on-Ribble (15 miles north).
Near you in Up Holland
We visit homes around Old Dog Inn, Church of St Thomas the Martyr and Up Holland High School. The closest station to Up Holland is Upholland station, about 1 mile south-west of the centre. Well-known places in the area include Billinge Hospital (1.7 miles south-east). Not far away are Billinge Hill.
Do you need bath re-enamelling in Up Holland?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Get in touch if you’ve noticed:
- A bath in a colour that no longer suits
- Staining under the taps and around the waste
- Several chips and rust patches
- An old resurfacing that is failing
What to look for in a quote
- How changes to the job are handled
- Aftercare advice
- Whether the price covers travel
- The length of the guarantee and what it covers
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
- Don’t leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
How we price bath re-enamelling
Resurfacing from £350. There’s no charge for travel to Up Holland. The price depends on:
- Any earlier repairs that need removing first
- How many items we do on one visit
- Access to the area
- How many areas need work
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Getting a price from photos
The better the photos, the more accurate the price. Here’s what we find most useful:
- Something in shot to show the size
- Any details about the material
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
Send us photos of the damage and a wider shot of the whole item, with your WN8 postcode, and we will reply with a fixed quote.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Repairing versus replacing in Up Holland
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. The full price is agreed before booking.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- Colour mixed on the day to match
- Every repair guaranteed for a year
- Usually one visit, start to finish
Take a look at our pricing or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
