St Helens · England
Bath & shower resealing (mastic) in Park Hill, St Helens
Fixed-price bath resealing in Park Hill and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Unsealed corners
- Damp near the bath
- Discoloured, yellow sealant
Bath resealing in Park Hill, done in place
A proper reseal starts with removing every trace of the old silicone. New silicone will not bond to old, which is why many DIY jobs peel. We regularly repair shower trays & enclosures, wet rooms and kitchen worktops & sinks, and people most often call us about old sealant that looks dirty and sealant that’s split or lifting.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Park Hill (WA11)
- Area hub
- St Helens
- Guarantee
- One year on every repair
- Price
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair will not do:
- Loose tiles, which need refixing first
- Movement in the bath or tray
- Gaps so wide they need filling or trims before sealing
Send us photos and we’ll tell you honestly before booking.
What we work on
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
- Baths
- Kitchen worktops & sinks
How we price bath resealing
There are no hourly rates or hidden extras. The price is based on:
- How many areas need work
- What kind of damage it is
- Previous DIY repairs that have to come out
- Doing more than one item at once
We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Please include:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- A clear, close picture of the problem area
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Clean the joints with a mild cleaner
- Don’t stand toiletries on the seal
- Reseal at the first sign of lifting
- Run the extractor fan during and after showers
Use the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.
What your bath or shower is made of matters
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. The job generally runs to about two hours for a bath.
- First we strip out every bit of the old mastic.
- Next we clean the joint and deal with mould.
- We make sure the joint is completely dry.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Preparing for the visit
- Let us know about parking or access
- Have a window or extractor fan available
- Let us know which floor the room is on
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Advice
Towns and villages near Park Hill
Other services in Park Hill
Is resealing worth it?
Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, which costs far more to put right. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Why book with us
- Rooms protected and left tidy
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
- Straight answers about what a repair can do
See our pricing.
Covering Park Hill
Park Hill is about 2 miles south of Skelmersdale, in St Helens. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover all 32 towns and villages in St Helens, from the larger towns to small villages. We work right across the region, from Park Hill to Liverpool (9 miles away).
Here we cover the WA11 postcode area. If you’re just outside Park Hill, we cover Rainford Junction (1 mile east), Rainford (1 mile south-east), Crawford (2 miles east), Kings Moss (2 miles east) and Skelmersdale (2 miles north). We also work in nearby towns such as St Helens (5 miles south-east), Prescot (7 miles south), Newton-le-Willows (8 miles south-east), Haydock (6 miles south-east), Earlestown (8 miles south-east) and Parr (6 miles south-east).
Around Park Hill
Typical jobs here are in homes near Rainford Brook Lodge Community Primary School and Rainford High School, among other places. There’s a railway station in Park Hill itself: Rainford station. Nearby you will also find Billinge Hospital (3.6 miles east). Not far away are Billinge Hill.
FAQs for Park Hill
Why does my sealant keep going mouldy?
Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.
How long does resealing take?
A bath or shower typically takes a couple of hours. It then needs time to cure.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Can you redo someone else’s repair?
Normally, yes. We remove the old repair before doing a new one, so let us know about it.
Are there extra charges for Park Hill?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Do you work in Park Hill?
Yes, we do. Repair technicians travel to Park Hill from across the region, and the price is the same as everywhere else.
Do you seal over the old sealant?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
About our accreditations · Every repair comes with a one-year guarantee.
