Northumberland · England
Bath Re-enamelling for Paxton homes
Our repair technicians come to Paxton for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Stains that will not shift
- An old resurfacing that is failing
Repairing versus replacing in Paxton
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the entire surface with the bath left where it is. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why us?
- Same prices wherever you are
- Rooms protected and left tidy
- Most jobs done in one visit
- Straight answers about what a repair can do
Take a look at our full price list and bath cost comparison.
Bath re-enamelling in Paxton without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s stains that won’t shift and a coloured bath you want in white, we can generally put it right, whatever the material.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Paxton (TD15)
- Region
- Northumberland
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Paxton
More services for Paxton
About Paxton
Paxton is about 4 miles west of Berwick-upon-Tweed, in Northumberland. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Paxton is one of 189 towns and villages in Northumberland where we work. You can also see our page for Edinburgh, about 44 miles away.
We cover every part of TD15. Whether you live on The Orchard, Merse View and Kanes Close or a nearby road, we can come to you. If you’re just outside Paxton, we cover Foulden (2 miles north), Hutton (2 miles west), Horncliffe (2 miles south), Middle Ord (2 miles south-east) and East Ord (3 miles east).
Near you in Paxton
Around Paxton, we work in homes near Cross Inn and Paxton Church. The nearest railway station is Berwick-Upon-Tweed station, roughly 3.7 miles east of the centre. Well-known places in the area include Edrington (0.5 miles north-east) and Chain Bridge Honey Farm (1.4 miles south). The countryside around Paxton includes Halidon Hill.
Landlord and trade work in Paxton
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Paxton: your questions answered
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
- Leaks from fittings rather than the bath
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
How it works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the day after.
Preparing for the visit
- Keep a parking space free if you can
- Make sure the room can be ventilated
- Mention any parking restrictions or tricky access
How to get a price
To get a price, send two or three photos using our quote form or ring us. We will say immediately if a repair is the right fix.
Read more
Keeping it looking good
It’s all simple stuff:
- Don’t use the bath until it has fully cured
- Do not leave bottles, razors or sponges standing on the surface
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
Dry the bath after use if possible, and rinse away any product left on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
What bath re-enamelling costs
Resurfacing from £350. You’ll know the full cost before booking. We look at:
- Doing more than one item at once
- How many areas need work
- The material
- Where the damage is and how we get to it
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
How to get a fixed quote
Most quotes are done from pictures alone. To help us price it:
- What it’s made of, if you know
- Details of any past repairs
- Something in shot to show the size
- The postcode, so we can plan the visit
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
When to call us in Paxton
Often the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.
Clients normally contact us about:
- A coating lifting around the plughole
- Staining under the taps and around the waste
- A coloured bath you want in white
- Several chips and rust patches
What your quote should include
- What happens if they find more damage
- Aftercare advice
- What prep work is covered
- Whether the price is fixed and includes VAT
About our accreditations · Every repair comes with a one-year guarantee.
