Northumberland · England
Bath Re-enamelling for Pegswood homes
Bath re-enamelling across Pegswood and nearby, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Bath re-enamelling at your home in Pegswood
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Typical jobs include stains that won’t shift and an old resurfacing that’s failing, in basins & shower trays, cast iron baths and pressed steel baths.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.
- Area
- Pegswood (NE61)
- County
- Northumberland
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Your questions about bath re-enamelling in Pegswood
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Can you repair something that’s been repaired before?
Generally, yes. The old repair comes out first.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
When a repair is not the answer
Before booking, it’s worth knowing the limits:
- Damage hidden under a previous coating, until it’s stripped back
- A bath that’s rusted through
- Acrylic that moves when you stand in it
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Our work in Pegswood
Pegswood is about 2 miles north-east of Morpeth, in Northumberland. Customers in Pegswood get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Pegswood is one of 189 places in Northumberland we cover. Our nearest city page is Newcastle upon Tyne, about 13 miles away.
We work across NE61. You’ll find streets such as De Walden Square, Whitefield Crescent and Charles Street. Close by, we cover Longhirst (1 mile north), Bothal (1 mile east), North Choppington (2 miles south-east), Morpeth (2 miles south-west) and Bullers Green (2 miles west). We also work in nearby towns such as Blyth (6 miles south-east), Cramlington (7 miles south), Ashington (3 miles east), Bedlington (4 miles south-east), Newsham (7 miles south-east) and Amble (11 miles north).
Landmarks near Pegswood
Around Pegswood, we work in homes near The King Edward VI Academy, Mafeking Park and Pegswood Primary School and the streets around them. Pegswood has its own railway station: Pegswood station. Other landmarks nearby include St George's Park (1.3 miles west) and Bothal Castle (1 mile south-east).
- Local facilities include Municipal Borough of Morpeth (1.9 miles south-west)
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes a full day in most cases. We leave the room clean and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
Related advice
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Never use suction bath mats
- Respect the curing time we give you
- Wash away dyes and oils after use
- Wipe the bath dry after use in hard water areas
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Signs you need bath re-enamelling in Pegswood
Often the bath has just had decades of use, and only the surface is worn. The body of the bath is typically perfectly sound.
Common reasons people in Pegswood contact us include:
- Worn patches where water runs and sits
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- Stains that will not shift
Before you book anyone
- Who will actually do the work
- How the room is protected while they work
- If travel is included in the price
- What happens if the damage is worse than the photos show
Nearby places to Pegswood
Also in Pegswood
Work for landlords and builders
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job, from your photos. What matters most is:
- Doing more than one item at once
- The size and number of damaged areas
- Any earlier repairs that need removing first
- Unusual colours or finishes
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed price
Good photos mean an accurate price. Here’s what we find most useful:
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- Details of any past repairs
- The material, if you know it
For a price in Pegswood, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
About our accreditations · Every repair comes with a one-year guarantee.
