Bridgend · Wales
Bath re-enamelling & resurfacing in Pen-dre, Bridgend
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Pen-dre. Free, fixed quotes from your photos.
- Resurfacing from £350
- Stains that won’t shift
- Chips and rust in more than one place
Signs you need bath re-enamelling in Pen-dre
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
It’s worth getting a quote if you see:
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
- Lots of chips and rust spots
Comparing quotes
- What prep work is covered
- The length of the guarantee and what it covers
- How changes to the job are handled
- Whether the price is fixed and includes VAT
Bath re-enamelling in Pen-dre, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Typical jobs include staining under the taps and around the waste and an outdated colour you’d like to change, in pressed steel baths, Victorian roll-tops and cast iron baths.
All our work comes with our one-year guarantee.
- Where
- Pen-dre (CF31, CF35)
- Area hub
- Bridgend
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
How the visit works
We agree an arrival time beforehand. On site, it takes a full day for most jobs. We leave the room clean and you’ll know when it can be used.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Read more
Prices and what affects them
Resurfacing from £350. We price every job individually. What matters most is:
- Previous DIY repairs that have to come out
- The material
- How many areas need work
- Access to the area
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what helps:
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- One picture of the whole bath
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
FAQs for Pen-dre
Do you work in Pen-dre?
Yes. We work across the UK and travel to Pen-dre. Send pictures and we’ll quote, or call 0345 017 0787.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Do you cover the whole of Bridgend?
Everywhere in the UK, Pen-dre included. Travel is included in the price.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Can you repair something that is been repaired before?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
More services for Pen-dre
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why Pen-dre customers choose us
- No need to remove anything
- Every repair guaranteed for a year
- Fixed prices from your pictures
- One visit for most repairs
See our full price list and guide to resurfacing and replacement costs.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- A quick wipe after use keeps limescale away
- Do not let dyes or oils sit on the finish
- Respect the curing time we give you
- Store bottles off the bath
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Landlords, agents and businesses in Pen-dre
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Landlords, letting agents and housing providers in Pen-dre use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
About Pen-dre
Pen-dre is about 1 mile north of Bridgend, in Bridgend. From the centre of Pen-dre to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover all 91 towns and villages across Bridgend.
Jobs in CF31 and CF35 are booked in the same way as anywhere else. We regularly work on streets such as Coity Road, Main Avenue and Joslin Road and the roads around them. Pen-dre is on the A4061, which makes it straightforward to reach. We also travel to Wildmill (1 mile west), Litchard (1 mile north), Bridgend (1 mile south), Derwen (1 mile north) and Pen-y-cae (1 mile north). We also work in nearby towns such as Maesteg (7 miles north-west), Porthcawl (6 miles south-west), Pencoed (3 miles east), Pyle (5 miles west), Cornelly (6 miles west) and Gogledd Corneli (6 miles west).
Near you in Pen-dre
We visit homes around Bryntirion Comprehensive School, St Illtyd's Church and The Red Dragon pub and the streets around them. There’s a railway station in Pen-dre itself: Wildmill station. Well-known places in the area include Newcastle Castle (0.8 miles south-west) and Princess of Wales Hospital (within half a mile south-east). Not far away are Cornelly Quarry Lake 2 and Mount Ash.
About our accreditations · Every repair comes with a one-year guarantee.
