Bridgend · Wales
Bath re-enamelling & resurfacing in Litchard, Bridgend
Bath re-enamelling in and around Litchard: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A roll-top that’s seen better days
How we handle bath re-enamelling in Litchard
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s lots of chips and rust spots and a roll-top that’s seen better days, we can help, whatever the material.
You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Litchard (CF31, CF35, CF32)
- County
- Bridgend
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Litchard
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- The material
- The colour and finish to match
- Any earlier repairs that need removing first
- How easy the damage is to reach
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.
Quotes from your pictures
Most quotes are done from photos alone. To make it quick:
- The material, if you know it
- Details of any past repairs
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
Upload a picture of the damage and a wider shot of the whole item, and tell us you’re in Litchard, and we will come back with a fixed quote.
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
We carry out planned and one-off repairs for housing associations and facilities teams in Bridgend and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Repairing versus replacing in Litchard
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
Why book with us
- Dust sheets down, tidy finish
- Fixed prices from your pictures
- Every repair guaranteed for a year
- Colour mixed on the day to match
See our full price list or bath cost comparison.
FAQs for Litchard
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Are there extra charges for Litchard?
We do not add a call-out fee. Your fixed price includes everything.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Litchard.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Is my repair covered?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Also in Litchard
What a repair cannot fix
A repair is not always the answer, and we’ll tell you before we start. Repairs won’t solve:
- Acrylic that moves when you stand in it
- Steel that has corroded right through
- A bath split right through the body
Send us pictures and we’ll tell you honestly.
What we work on
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Repair dripping taps early
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
- Do not leave bottles, razors or sponges standing on the surface
Dry the bath after use if possible, and rinse off any bath products.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Litchard and the surrounding area
Litchard is about 1 mile north of Bridgend, in Bridgend. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Litchard is one of 91 places in Bridgend where we work.
Every address in CF31, CF35 and CF32 is covered, from the main roads to the quietest streets. From Joslin Road, Garfield Avenue and St Francis Road or a nearby road, a technician can come to you. Being close to the A4061, Litchard is easy for our technicians to reach. If you are just outside Litchard, we cover Derwen (1 mile north-east), Pen-dre (1 mile south), Pen-y-cae (1 mile north-west), Wildmill (1 mile south-west) and St Bride's Minor (1 mile north-west). Further out, we also cover Maesteg (7 miles north-west), Porthcawl (6 miles south-west), Pencoed (3 miles east), Pyle (5 miles west), Cornelly (6 miles west) and Gogledd Corneli (6 miles west).
Local landmarks in Litchard
We visit homes around Litchard Primary, Church Of St Mary and Bryntirion Comprehensive School. The nearest railway station is Wildmill station, roughly 0.5 miles south-west of the centre. Further afield, we also cover the area around Princess of Wales Hospital (0.6 miles south) and Designer Outlet Bridgend (0.5 miles north). The countryside around Litchard includes Cornelly Quarry Lake 2 and Mount Ash.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
The process
Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow most of the day from start to finish. Before we go, we’ll explain when it can be used and how to look after it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
How to prepare
- Mention any earlier repairs or resurfacing
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
Get a quote
To get a price, send a couple of pictures using our quote form or call us. We’ll say immediately if a repair is the right fix.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
